|
Description
The uPLC PL100 is an interesting solution for simple automations normally performed by single electromechanical components and wirings. Using a Ladder programming language, this PLC allows to integrate different functions of standard devices such as timers, counters, thermostats, relays. Six digital inputs NPN, 3 inputs for PTC sensors and four outputs (relay 10A resistive) are available.
Development environment Plprog for Windows enables an easy and user-friendly programming. A Starter-kit including PLC, programming software, cables and technical data sheet is available.
Serial RS485 allows communication to Pixsys Operator panel TD25 with Pixsys protocol.
|
|
|
Ideal Application
Packaging
Pump automation
Centralized transport systems
Hopper loader
Clean Machinery
Inspection system
Glass and ceramic automation
Footwear machinery
|
Technical
data
BOX: standard DIN 43880 (71X90mm)
DIN rail EN 50022
POWER SUPPLY : 12…24Vac/Vdc ±10%, 50Hz
POWER CONSUMPTION: 4 Watt
OPERATING CONDITIONS: 0-45°, 35…95rH%
PROTECTION: IP20 Box
INPUTS: 3 PTC 2KO with hysteresis, accuracy ±1°C
DIGITAL INPUTS: 6 NPN
OUTPUTS: 4 relays 10A – resistive
16 programmable TIMERS
16 BISTABLE RELAYS:
8 COUNTERS (0..200 countings)
12 AUXILIARY RELAYS
SERIAL RS485 ON PIN OR PLUG (Pixsys ASCII protocol)
Programming execution time min. 100ms
|
