Photocell,Amplifier,T.J.C. Teknik ApSPhotocell,Amplifier,T.J.C. Teknik ApSPhotocell,Amplifier,T.J.C. Teknik ApSPhotocell,Amplifier,T.J.C. Teknik ApSPhotocell,Amplifier,T.J.C. Teknik ApS


Photocell Amplifier from T.J.C. Teknik ApS

  • Available with operating voltages from 12 VAC/DC to 230VAC.

  • 11-pin plug-in housing.

  • Relay/logic output.

  • Light/dark function.

  • LED indication.

  • Timer ON/OFF, adjustable between 0 and 10 sek.

  • Also for print installation.

Photocell,Amplifier,T.J.C. Teknik ApS

11 Pin Plug In Photocell Amplifier
Technical Specification for:
OA 721 - Relay Output
The OA 721 is applicable with all transmitters/receivers operating with separate amplifiers.

OA 722 - Relay & Solid State Output
The OA 722 is applicable with all transmitters/receivers operating with separate amplifiers.

OA 823 - Relay & Solid State Output - On/Off Time Delay
The OA 823 is applicable with all transmitters/receivers operating with separate amplifiers.

OA 727 - 2 Channel Multiplex - Relay Or Solid State Output
The OA 727 is applicable with all transmitters/receivers operating with separate amplifiers.

Supply options:

230, 115VAC, 24, 12VAC/DC

Power consumption:

Ca. 2,8VA

-Relay:

250VAC, 8A, 2000VA

Output

 

-Solid state:

NPN or PNP 50mA 30VDC

Modulations Freqency:

App. 7,5KHz.

Response time:

Typ. 35msek.

Ambient temperature:

-20C to +55C

Housing:

Noryl

PCB Mouning Photocell Amplifier
Technical Specification for:
OA 793 - Solid State Output
The OA 793 is applicable with all transmitters/receivers operating with separate amplifiers.

Supply options:

24VDC, -10% til 15%

Power consumption:

Max. 35mA

Output:

NPN/PNP transistor open kollektor 50mA max.

Modulations Freqency:

4 til 6KHz

Ambient temperature:

-20C to +55C

Dimension:

L55,5 x W40,5 x H113,5mm

Terminal Block Connection Photocell Amplifier
Technical Specification for:
OA 9214
- Relay Output
The OA 9214 is applicable with all transmitters/receivers operating with separate amplifiers.

OA 9039 - Solid State Output
The amplifier operates on a phase and frequency synchronised principle based on a PLL syatem. LED indication of "beam on" and potentiometer for gain control adjustment. The OA 9039A type has no ajustment option (automatic gain control). The amplifier has board terminal blocks for connection of transmitter and receiver and Molex-connector for supply and PNP - output (also available with board terminal blocks).

OA 9039A - Solid State Output - Automatic Gain Control
The amplifier operates on a phase and frequency synchronised principle based on a PLL syatem. LED indication of "beam on" and potentiometer for gain control adjustment. The OA 9039A type has no ajustment option (automatic gain control). The amplifier has board terminal blocks for connection of transmitter and receiver and Molex-connector for supply and PNP - output (also available with board terminal blocks).

OA 9420 - 4-Channel Multipex - Relay Or Solid State Output
The OA 9214 is applicable with all transmitters/receivers operating with separate amplifiers.

OA 9810 - 2-Channel Amplifier For Seat Control In Taxies
The OA 9810 is a 2-channel opto-electric amplifier for passenger seat control in taxies. The amplifier is designed to operate with two sets of thru-beam photo cell units i.e. with transmitter and receiver in face to face setup.

OA 9504 - Amplifier Operating With A Magnetic Valve
The OA 9505 is an opto-electric amplifier specially designed to operate with a magnetic valve and an opto-reflex sensor detector.
Response time: approx. 50ms. The amplifier operate on a phase and frequency synchronised principle based on a PLL system ensuring high immunity to ambient light.

Supply options:

24VAC/DC 15% at AC: 45-65Hz

Power consumption:

<75mA

Output:

1 changeover 125VAC, 2A, 250VA

Modulations frekvens:

Ca. 7,5KHz

Ambient temperature:

-20C to +60C

Dimension:

L100 x B50,5 x H24mm


Hirotronix,Sensors,Solutions,Inc


Site Design: Process Controls And Instrumentation