Coating Nozzles

Apply thin coatings (wet or dry) on product moving past nozzles
Typical operating conditions for this application are listed for each nozzle

	BJ 30-80 psi 4-7 bar 0.22-17 gpm 0.3-40 L/min 25°-80°
	NF 3.0-80 psi 2-5.5 bar 0.22-17 gpm 0.8-64 L/min 50°-120°
	L 3.0-80 psi 3-7 bar 0.22-17 gpm 1-4 L/min 90°
	PJ 60-1000 psi 4-7 bar 0.014-1.40 gpm 0.05-1.7 L/min 90°
	SAM 10-15 psi 0.7-1 bar 0.44-19 scfm 0.8-7.2 Nm³/h 20°-70°
	XA 20-60 psi 1.5-4 bar 2.9-70 gph 11-265 L/h 0.4-10 scfm 0.6-16 Nm³/h 20°