Dry Scrubbing Nozzles

Inject lime slurry; inject food and chemical product into spray dryer
Typical operating conditions for this application are listed for each nozzle

	SpiralAir™ SA 50-100 psi 3.5-7 bar 1.4-15 gpm 5.3-57 L/min 37-186 scfm 45-225 Nm³/h 20°-60°
	XA 40-60 psi 3-4 bar 0.7-44 gph 2.6-167 L/h 1.5-22 scfm 1.8-27 Nm³/h 20°-40°
	WT 60-150 psi 4-10 bar 0.12-15 gpm 0.45-57 L/min 80°-130°
	WTX 60-150 psi 4-10 bar 0.12-15 gpm 0.45-57 L/min 70°-140°