Hollow,Cone,Spray,Nozzles,Spiral Design,John Brooks Company Limited
   Home   Spraying Nozzles  Gamajet Tank Cleaning   Pumps   Filtration Equipment   Systems   Service   Municipal   Tech Center   Contact Us  
Process Controls Home
 
  Spray Nozzle Applications
Line Card
Spray Dry
Full Cone Nozzles
Hollow Cone Nozzles
Flat Spray Nozzles
Fine Spray Nozzles
Spray Coverage Information
   

Subscribe to our
E-Newsletter:
SPF E-NEWS
Type your email address in the box below:


Featured Product

Hollow Cone Spray Nozzles From John Brooks Company Limited

Hollow cone spray nozzles are an extremely simple design that produces a high quality, small droplet size spay pattern primarily through centrifugal force. Using the design enables standard type hollow cone nozzles to produce a soft circular spray of relatively fine droplets, while having a free passage size (good clog resistance) considerably larger than flat fan or full cone nozzles of similar flow rates. Free passage size is important in applications involving solids particulate in the liquid being sprayed, such as in a recirculating water cooling pond application. Fine droplets are important in gas and other product cooling applications, because finer droplets mean more water surface area in contact with the gas or other product being cooled. Soft impact is important to minimize bounce-back and product damage in applications where a coating is being deposited onto a surface, or where delicate items such as soft fruit are being sprayed.

 Hollow,Cone,Spray,Nozzles,Spiral

Standard Hollow Cone Nozzles

BJB hollowcone spray nozzles are small capacity nozzles which produce a uniform hollow cone spray pattern of fine droplets. they are available in male and female NPT pipe connection sizes of 1/8" to 3/4". Spray angles range from 60 to 90 degrees with flow rates from 0.05 to 12 gallons per minute at 10 psi.

View Catalogue Pages in PDF Format:

Spray Coverage Information:

Request Quotation


 
Hollow,Cone,Spray,Nozzles,Spiral

Spiral Design Spray Nozzles

BSJJB spiral design spray nozzles are an in-line design featuring an external spiral to produce a hollow cone pattern. Droplet size is small, providing a large amount of water surface area available for cooling applications, and the unrestricted orifice gives good clogging resistance. Flow rates range from 1.4 to 1050 gallons per minute at 40 psi, with the full range being available in spray angles of 50, 120 and 180 degrees. Male NPT pipe connection sizes are from 1/4" to 4". Some sizes are available with female NPT or ANSI flanged connections to special order. 

View Catalogue Pages in PDF Format:

Spray Coverage Information:

Request Quotation


©2004  fluidhandlingsolutions.com. Fluid Handling Solutions™ and the Brooks Brooks™ Logo are trademarks of John Brooks Company Limited. All Rights Reserved.

Site Designed By Panther Marketing & Design