Indoor Audible Alarms
Single Point Float Switches
Multi-Point Float Switches
Stainless Steel Liquid Level Overfill Float Switch |
Ktech Model FS601-HT-125C
Model FS601-HT-125C Stainless Steel Liquid Level Overfill Float Switch
The FS601-HT-125C Stainless Steel Liquid Level Overfill Float Switch set-point distances are field adjustable by using an extension pipe. The lead wires must be ordered to a suitable length in order to pass through the extension pipe. Standard lead wire length is 120. The switch must be connected in series with a load. The contact arrangement may be changed from normally open (NO) to normally closed (NC) and vice versa. Remove the stop collar and turn over the float and then return the stop collar to the original position. If the contact arrangement is altered use an ohmmeter to test that the switch operatec correctly The switch must be connected in series with a load.
Model FS601-HT-125C Construction
DO NOT CONNECT THE SWITCH DIRECTLY ACROSS THE POWER SUPPLY.
The voltage / current product must not exceed the power rating.
Model FS601-HT-125C Specifications
Manufacturer Of Float Switches, Vacuum Switches, Alarms And Pump Controllers.