Indoor Audible Alarms
Single Point Float Switches
Multi-Point Float Switches
Stainless Steel Interface Single Point Float Switch Ktech Model FS601-I
Ktech Model FS601-I Stainless Steel Interface Single Point Float Switch
The Stainless Steel Interface Single Point Float Switch Ktech Model FS601-I is activated by an interface float that is weighted to float on water and sink in oil. Switch set-point distances are field adjustable by using an extension pipe. The lead wires must be ordered to a suitable length in order to pass through the extension pipe. Standard lead wire length is 120. The switch must be connected in series with a load. The contact arrangement may be changed from normally open (NO) to normally closed (NC) and vice versa. Remove the stop collar and turn over the float and then return the stop collar to the original position. If the contact arrangement is altered use an ohmmeter to test that the switch operatec correctly The switch must be connected in series with a load.
Model FS601-I Construction
DO NOT CONNECT THE SWITCH DIRECTLY ACROSS THE POWER SUPPLY.
The voltage / current product must not exceed the power rating.
Model FS601-I Specifications
Manufacturer Of Float Switches, Vacuum Switches, Alarms And Pump Controllers.