Indoor Audible Alarms
Single Point Float Switches
Multi-Point Float Switches
Multi-Point Liquid Level Float Switches |
Ktech Models FS301-1-ADJ
Model FS301-1-ADJ Multi-Point Liquid Level Float Switches
FS301-1-ADJ multi-point liquid level float switch set-point distances are measured from the underside of the 2 NPT bushing to the center of the float at the level where the switch is activated. The stem can slide up and down to adjust the switch set point. The switch set point distance S.P. A varies from 2 minimum to a maximum value as ordered. Screw the float switch into the 2 NPT opening on top of the tank. Slide the brass stem up or down to get the desired switch set point S.P. A. Tighten the compression nut at this point. The conductors are colour coded to identify each switch. The switch must be connected in series with a load.
Model FS301-1-ADJ Construction:
DO NOT CONNECT THE SWITCH DIRECTLY ACROSS THE POWER SUPPLY.
The voltage / current product must not exceed the power rating.
Model FS301-1-ADJ Specifications
Manufacturer Of Float Switches, Vacuum Switches, Alarms And Pump Controllers.