Single Point Liquid Level Float Switches

PC1103A-HL Duplex Pump Controller

Model SM4001-C(CX) Stainless Steel Single Point Tank Level Float Switch

The SM4001-C(CX) is all 316 stainless steel. It has a 1/2” NPT fitting for mounting in the side of a tank. The contact arrangement can be changed from Normally Open (NO) to Normally Closed (NC). The nut is marked with NC and NO. Tighten the switch such that the desired arrangement is indicated on the top face of the nut.

<< Learn More >>

PC1103A-HL Duplex Pump Controller

Model SM4001-CXEP Explosion Proof Stainless Steel Single Point Tank Level Float Switch

The SM4001-CXEP is all 316 explosion proof stainless steel single point tank level float switch. It has a 1 / 2” NPT fitting for mounting in the side of a tank.

<< Learn More >>

PC1103A-HL Duplex Pump Controller

Model FS501SF Stainless Steel Single Point Liquid Level Float Switch

The FS501SF Stainless Steel Single Point Float Level Switch set-point distances are field adjustable by using an extension pipe. The lead wires must be ordered to a suitable length in order to pass through the extension pipe. Standard lead wire length is 120”.

<< Learn More >>

Model FS501SF/15 Stainless Steel Single Point Liquid Level Float Switch

The FS501SF/15 Stainless Steel Single Point Float Level Switch set-point distances are field adjustable by using an extension pipe. The lead wires must be ordered to a suitable length in order to pass through the extension pipe. Standard lead wire length is 120”.

<< Learn More >>

PC1103A-HL Duplex Pump Controller

Model FS601 Stainless Steel Single Point Liquid Level Float Switch

The Ktech FS601 Stainless Steel Liquid Overfill Protection Float Level Switch set-point distances are field adjustable by using an extension pipe.

<< Learn More >>

Model FS601-HT-125C Stainless Steel Single Point Liquid Level Float Switch

Model FS601-HT-125C Stainless Steel Float Switch is a single point switch. The stem and float are stainless steel. It has a 1/4" NPT mounting fitting.

<< Learn More >>

Model FS601-I Stainless Steel Single Point Liquid Level Float Switch

The Stainless Steel Interface Single Point Float Switch Ktech Model FS601-I is activated by an interface float that is weighted to float on water and sink in oil. Switch set-point distances are field adjustable by using an extension pipe.

<< Learn More >>

Model FS601-I-HT-125C Single Point Stainless Steel Interface Float Switch

The FS601-1-HT-125C Stainless Steel Interface Float Switch is activated by an interface float that is weighted to float on water and sink in oil.

<< Learn More >>

PC1103A-HL Duplex Pump Controller

Model FS801-602 Single Point Stainless Steel Liquid Level Float Switches

The FS801-602 Stainless Steel Single Point Float Level Switches set-point distances are measured from the underside of the 1/4" NPT bushing to the centre of the float at the level where the switch is activated.

<< Learn More >>

Model FS801-602L Single Point Stainless Steel Liquid Level Float Switches

The FS801-602-L Stainless Steel Single Point Float Level Switches set-point distances are measured from the underside of the 1/4" NPT bushing to the centre of the float at the level where the switch is activated.

<< Learn More >>


Manufacturer Of Float Switches, Vacuum Switches, Alarms And Pump Controllers.

About Us

Ktech Industrial Products Inc., is a manufacturer of float switches, alarms and pump controllers. We provide liquid level control solutions for industrial, petroleum,chemical and food equipment applications.

Sitemap

Our Products

Liquid level control solutions for industrial, petroleum,chemical and food equipment applications. Ktech Industrial Products Inc., also manufacturers Float Switches, Levelometers, Pump Controllers and Vacuum Switches.

Sample Content

Liquid Level Controls, Float Switches, Levelometers, Pump Controllers and Vacuum Switches.

Get in Touch