|
 The DRG26 - Stainless Steel Pressure Gauge w/ Switch all electrical connections are made via a weather proof 90° angle connector plug on the side of the indicator housing. Connections are made via numbered screw terminals inside the
connector.
It is recommended that a multi-conductor jacketed cable be used. The outside diameter of the jacket should be large enough to ensure that the weather-tight cable gland on the plug can be tightened down snugly.
DRG26 - Stainless Steel Pressure Gauge w/ Switch
- Range: Per part number and catalog specifiaction
- Accuracy:
20 PSIG Full Scale or Less: ±1.6% of Full Scale
30 PSIG Full SCale or More: ±1.0% of Full Scale
- Fittings: 1/2” NPT
- Wetted Parts:
DRG26: 316Ti Stainless Steel
DRF34: Brass, Bronze, Copper
- Housing Diameter: 4” of 6.3”
- Housing Materials:
DRG26: 304 Stainless Steel
DRF34: Aluminum standard, optionally 304 Stainless Steel
- Movement:
DRG26: 316 Ti Stainless Steel
DRF34: Brass
- Switch Ratings:
Maximum Voltage: 250 VAC
Maximum Current: 0.6 amps
Maximum Power: 10 w/18 VA
- Electrical Protection:
Unfilled Housings: NEMA 3R
Oil Filled Housings: NEMA.
Special Features:
- Combination Pressure Gauge & Switch
- 1 or 2 SPST Switches Possible
- Bourdon Tube Design
- ±1.0% Accuracy
- Pulsation and Vibration Damping Through Optional Paraffin Oil Filling
Additional Product Info
 Download Specifications
|
