AODD Pump 1 1/2" Non-Metallic And Metallic From Lutz

Models (Wetted Materials) Max Temp
LPB-1 1/2" (PP/BUNA N) 150°F
LPT-1 1/2" (PP/TEFLON) 150°F
LKT-1 1/2" (PVDF/TEFLON) 200°F

Features:

• Absolutely lube-free and non stalling operation
• Can safely run dry
• Self-priming dry or wet
• Centre block made of corrosion-free plastic
• Few, easily accessible construction parts
• Flow rate up to 492 l/min

Benefit:

• No risk of pump failure due to to poor lubrication
• No contaminating of the environment or of the product itself by oil vapour
• Gentle pumping of liquids and pastes
• Flow rate and pressure can be regulated continuously
• No dynamic seals
• Possible air leakage arising at connections or in case of diaphragm rupture does not harm the air system
• Easy maintenance without special tools
  

Metallic AODD Pump

Capacity: Adjustable 0 to 95 GPM

Max/Min Air Pressure:
LKT 70/20 PSI
Other Models 100/20 PSI

Dry Lift Capacity at MAX PSI:
Models w/ Teflon Balls 10 ft.
Other Models 15 ft.

Models (Wetted Materials) Max Temp
LAB-1 1/2" (ALUMINUM/BUNA N) 180°F
LAT-1 1/2" (ALUMINUM/TEFLON) 200°F
LSB-1 1/2" (STAINLESS/BUNA N) 180°F
LST-1 1/2" (STAINLESS/TEFLON) 200°F

Applications:
Filter press, tank cleaning systems, pigments and resins, etc.

Features:

• Absolutely lube-free and non stalling operation
• Can safely run dry
• Self-priming dry or wet
• Centre block made of corrosion-free plastic
• Few, easily accessible construction parts
• Flow rate up to 492 l/min
• Explosion-proof version in compliance with ATEX
• Directive 94/9/EC, category 2

Benefit:

• No risk of pump failure due to to poor lubrication
• No contaminating of the environment or of the product itself by oil vapour
• Gentle pumping of liquids and pastes
• Flow rate and pressure can be regulated continuously
• No dynamic seals
• Possible air leakage arising at connections or in case of diaphragm rupture does not harm the air system
• Easy maintenance without special tools