Advanced setup mode lets you select cell constant, TDS factor, temperature coefficient, manual or automatic temperature compensation, hysteresis band and more. It also lets you view previous calibration points.
The 1/8 DIN housing is ready to install in standard panels and NEMA rated boxes. Includes mounting hardware; accepts probes with stripped ends and Pt 100 RTD ATC elements.
| Measures
|
TDS, °C |
| TDSRange
|
0 to 10.00 ppm
0 to 100.0 ppm
0 to 1000 ppm
0 to 5.00 ppt
0 to 10.00 ppt
0 to 100.0 ppt
|
| TDSResolution
|
0.01 ppm
0.1 ppm
1 ppm
0.01 ppt
0.1 ppt
|
| Special features
|
Conductivity to TDS factor adjustable from 0.40 to 1.00 |
| Calibration
|
one point, slope calibration |
| Control accuracy
|
±1% full-scale |
| Temperature Range
|
-10.0 to 110.0 °C |
| Temperature Resolution
|
0.1°C |
| Temperature Accuracy
|
±0.5°C |
| Temperature Calibration
|
offset up to ±10°C |
| Control type
|
on/off |
| Number of inputs
|
one |
| Number of set points
|
two |
| Output Control
|
2 SPDT nonpowered relays, 6A at 110 VAC; 250 VAC max |
| Output Current
|
4-20 mA output, isolated |
| Hysteresis
|
0 to 10% of range, adjustable for each set point |
| Electrical isolation
|
yes, galvanically |
| Temperature Sensor
|
Pt 100 |
| Temperature Compensation
|
automatic or manual, from 0 to 100°C |
| Password protection
|
two levels |
| Display
|
4-digit, 14 segment scrolling LED |
| Operating Temperature
|
0 to 50°C |
| Housing
|
1/8 DIN |
| Dimensions
|
3-3/4"W x 1-7/8"H x 6"D |
| Shipping weight
|
0.5 lb (0.2 kg) |
These sturdy, compact 1/8 DIN TDS controllers withstand voltage fluctuations from 85 to 250V AC/DC! They are ideal for installation were electrical fluctuations are common, or install them in series throughout areas of differing electrical conditions. 
