CON 1000,RES 1000,Controllers,Oakton Instruments

CON 1000 and RES 1000Controllers
from Oakton Instruments




CON 1000 and RES 1000 Controllers from Oakton Instruments

Back to TDS/Conductivity Controllers

CON 1000 and RES 1000 Controllers

Fast on/off control with high ±0.5% accuracy- a performance breakthrough!

 

 

Large dual LCD shows measurement plus temperature simultaneously
Two set point, two SPDT relay operation... choose from lo/lo, lo/hi,or hi/hi control
Separate alarm relay
View control set points and other set up information with a button press
Adjustable temperature coefficient from 0.00 to 10.00% per °C
Choice of 0.01, 0.1, 1.0 or 10.0 cell constants
Push button one-point calibration
Two level password protection prevents tampering with settings
LED indicators signal control activities to monitor controller status
Built-in memory backup maintains set up if power fails

Our flexible OAKTON 1000 series 1/4 DIN conductivity and resistivity controllers have an advanced set-up mode to easily customize features. Their 0 to 2000 second selectable time delay and adjustable set point hysteresis bands mean you can tailor control relay action to meet your needs.

 

Each unit is selectable for isolated 0-20 or 4-20 mA transmitter/recorder output; 110 or 220 VAC; normally open or closed relays; and manual or automatic temperature compensation. The compact 1/4 DIN size fits into standard panel cutouts. The IP54 rated front panel keypad is weather resistant. Includes mounting hardware.

Click below to download Acrobat (.pdf) file of:
CON 1000 and RES 1000 controllers product bulletin
CON 1000 and RES 1000 controllers manual

Measures Conductivity, resistivity, °C
ConductivityRange 0.000 to 1.999 µS, 0.00 to 19.99 µS, 0.0 to 199.9 µS, 0 to 1999 µS, 0 to 5000 µS, 0.00 to 19.99 mS, 0.0 to 199.9 mS
ConductivityResolution 0.001 µS to 0.1 mS
ConductivityCell constant selectable from 0.1, 1.0, or 10.0
ResistivityRange 0.000 to 2.000 M, 0.00 to 20.00 M
ResistivityResolution 0.001 M or 0.01 M
ResistivityCell constant selectable from 0.01 or 0.1
Calibration one point
Control accuracy ±0.5% full scale
TemperatureRange 0 to 100°C
TemperatureResolution 0.1°C
TemperatureAccuracy ±0.5°C
TemperatureCalibration offset up to ±5°C
Control type on/off
Number of inputs one
Number of set points two (high and low)
Separate alarm relay yes
OutputControl 2 SPDT relays, 6 A at 110 VAC, 250 VAC maximum
OutputAlarm 1 SPDT relay, 6 A at 110 VAC, 250 VAC maximum
OutputCurrent isolated 0-20.4-20 mA, with 20% to 100% full-scale scalable boundaries, 600 maximum load
Hysteresis 0 to 10% of range
Relay delay selectable, 0 to 2000 seconds
Input impedance 10^12 M
Electrical isolation yes, galvanically
Temperature Sensor 100 or 1000 Pt RTD
Temperature Compensation Automatic or manual from -9.9 to 125°C
Password protection two level password
Display dual line LCD, 4-digit upper and 3 1/2 digit lower
Operating Temperature -10 to 60°C
Housing 1/4 DIN panel cutout
Dimensions 3.8" x 3.8" x 6.9" (9.6 x 9.6 x 17.5 cm)
Shipping weight 2.5 lbs (1.2 kg)



Site Designed And Maintained By Panther Marketing And Design