conductivity,con,transmitter,oakton,instruments

CON ConductivityTransmitter from Oakton Instruments




CON Conductivity Transmitter Oakton Instruments

Back to TDS / Conductivity Transmitters

CON Conductivity Transmitter

Two-wire design with input-to-output isolation ensures clean signal transmission even in noisy locations

 

 

 

Weatherproof IP54-rated housings—suitable for harsh environments
Accommodate virtually all Conductivity or TDS two-wire applications
Housing is field mountable

 

Simple, reliable blind transmitters are ideal for connecting to your PLC for advanced control systems. Or, connect to a recorder for a low cost documentation system. Transmitters can be installed in series with each transmitter isolated from the other to prevent disruption of operations even if one transmitter fails. These economical transmitters can be installed at multiple sites within a plant.

Click below to download Acrobat (.pdf) file of:
CON Conductivity Transmitter product bulletin
CON Conductivity Transmitter manual

Range 0 to 20.00 mS
Accuracy ±2% FS
Calibration two-point
ATC 2% per °C
Input conductivity cells with cell constant = 1.0 (use only with 3-wire cells)
Output 4 to 20 mA
Operating Voltage 12 VDC to 24 VDC
Load 100 max load for 12 VDC and 600 max load for 24 VDC
Dimensions 3" x 3" x 1.1" (7.6 x 7.6 x 2.9 cm)
Shipping weight 2 lbs (0.9 kg)



Site Designed And Maintained By Panther Marketing And Design