SINEAX Signal Conditioners from API-Camille Bauer

SINEAX Isolator


TI 816 Signal Isolator 500 V

Input:

0-20 mA, 4-20 mA

Output:

0-20 mA, 4-20 mA,
0-10 V to 2-10 V
  • Loop-Powered Passive Device
  • Order with V or mA Output
  • 600 Ω Maximum Burden (Current)
  • 500 Ω Maximum Burden (Voltage)
  • Only 0.5" (12.5 mm) Wide
  • Low Cost

Specifications   Instructions

 

DCM 817 Signal Isolator 500 V

Input:

0-20 mA, 4-20 mA

Output:

0-20 mA, 4-20 mA
  • Circuit Board Mounted
  • Loop-Powered Passive Device
  • 600 Ω Maximum Burden
  • Compact and Cost Effective OEM Solution

Specifications

 

SI 815 Signal Isolator 2300 V

Input:

4-20 mA

Output:

4-20 mA
  • Single and Multi-Channel Versions
  • Output Loop Powered (12-30 V)
  • Transfers Power to Input Loop
  • Optional FSK/Hart Protocol


Specifications  Instructions


TI 807Signal Isolator up to 4000 V

Input:

0-20 mA, 4-20 mA

Output:

0-20 mA, 4-20 mA
0-10 V
  • Loop-Powered Passive Device
  • One, Two, or Three Channel Versions
  • 1000 Ω Maximum Burden

Specifications   Instructions


SINEAX Signal Splitters & Amplifiers


TV 808 1-Channel Isolator / Amplifier

Input:

4-20 mA, 0-40 mA,
40 mA
0-40 V, 40 V

Output:

0-20 mA, 4-20 mA,
20 mA
0-10 V, 10 V
  • 3.7 kV  I/O to Power Supply Isolation
  • 2.3 kV Input to Output Isolation
  • Fully Configurable Input and Output Settings
  • Zero and Span Adjustments
  • Power: 24-60 VAC/VDC or 85-230 VAC/VDC
Specifications   Instructions


TV 808 2-Channel Isolator / Amplifier

Input:

4-20 mA, 0-40 mA,
40 mA
0-40 V, 40 V

Output:

0-20 mA, 4-20 mA,
20 mA
0-10 V, 10 V
  • Dual Channel Versions
  • Signal Splitter Versions
  • 3.7 kV I/O to Power Supply Isolation
  • 2.3 kV Input to Output Isolation
  • Zero and Span Adjustment for Each Channel
Specifications  Instructions

 

SINEAX Loop Power Packs


B 840 Multi-Channel Loop Power Supply

Input:

24, 115, or 230 VAC

Output:

4-20 mA, 24 VDC

  • 4-Channel 4-20 mA, 24V DC Versions
  • LED Monitor for Each Channel
  • Each Channel Isolated
  • Supply Voltage: 24, 115, or 230 VAC 50/60 Hz
  • 30 mA Current Limiter for Each Channel
Specifications    Instructions


B 812 Loop Power Supply with Signal Output and HART Communications

Input:

4-20 mA, 18 to 25.5 VDC
Source resistance 330 Ω

Output:

4-20 mA, 17 VDC no load
Permitted load: 750 Ω, 550 Ω with HART
  • 3.6 kV Input, Output, and Power Isolation
  • Red LED for Open and Short Circuit Fault Detection
  • Designed for HART Protocol
  • Supply Voltage: 20-70 or 60-265 VAC/VDC (45-400 Hz for AC)

Specifications   Instructions    Brochure

 


TV 809 Programmable Process Transmitter

Input:

0-30 mV to 0-1000V
0-20 A to 0-100 mA

Output:

0-20 mA to 20 mA, 20-4 mA
0-10 V to 10 V, 10-0 V

  • Fully Isolated
  • Removeable Plugs
  • Unipolar or Bipolar Input and Output
  • Reverse Output Available
  • Custom 57 Point Input Linearization
  • Optional Programmable Relay Alarm
  • PC Programmable
  • Supply Voltage: 24-60 or 85-230 VAC/VDC

Specifications    Instructions   

 


TV 819 Low Cost Process Transmitter

Input:

0-60 mV to 0-1000V
0-20 mA to 40 mA

Output:

0-20 mA to 20 mA
0-10 V to 10 V

  • Fully Isolated
  • Removeable Plugs
  • Unipolar or Bipolar Input and Output
  • Factory Configured
  • Supply Voltage: 24-60 or 85-230 VAC/VDC
Specifications    Instructions

  

V 604s Programmable Universal Transmitter

Two
Inputs:

0-2 mV to 40 V
0-80 A to -50-100 mA
Thermocouple, RTD,
Thermistor, Potentiometer

Output:

0-5 mA to 40 mA
0-4 V to
-12-15 V

  • PC Programmable
  • Unipolar or Bipolar Input and Output
  • Reverse Output Programmable
  • Custom Input Linearization
  • Programmable Alarm Relay
  • 3.7 kV Input/Output/Power Isolation
  • Supply Voltage: 24-60 or 85-230 VAC/VDC
Specifications    Instructions

V 604 Programmable Universal Transmitter

Input:

0-2 mV to 40 V
0-80 A to -50-100 mA
Thermocouple, RTD,
Thermistor, Potentiometer

Output:

0-5 mA to 40 mA
0-4 V to
-12-15 V

  • PC Programmable
  • Unipolar or Bipolar Input and Output
  • Reverse Output Programmable
  • Custom Input Linearization
  • Programmable Alarm Relay
  • 3.7 kV Input/Output/Power Isolation
  • Supply Voltage: 24-60 or 85-230 VAC/VDC
Specifications    Instructions

VC 603 Programmable Universal Transmitter with Alarms

Input:

0-2 mV to 40 V
0-80 A to -50-100 mA
Thermocouple, RTD,
Thermistor, Potentiometer

Output:

0-5 mA to 40 mA
0-4 V to
-12-15 V
1 DPDT, 2 SPDT

  • PC Programmable
  • 3 Independently Configurable Alarm Contacts
  • Unipolar or Bipolar Input and Output
  • Reverse Output Programmable
  • Custom Input Linearization
  • 3.7 kV Input/Output/Power Isolation
  • Supply Voltage: 24-60 or 85-230 VAC/VDC
Specifications    Instructions

Back To API-Camille Bauer