Tachometers from Dynalco Controls

Tachometers from Dynalco Controls, a large variety of Tachometers available to meet your requirements.

CRT-9x - Replacement Tachometers
The CRT-9X replaces Caterpillar tachometers: CAT-9X114, CAT- 9X116, and CAT-9X117.
SPD-100 - Intrinsically Safe Tachometers
The SPD-100 Intrinsically Safe Tachometer has 4-digit, unlighted, LCD display. CSA and ABS Type approved.
SPD-100L - Signal Powered Digital Tachometers
The SPD-100L Signal Powered Digital Tachometer is well-sealed for rugged indoor and outdoor applications. It has 4-digit, lighted, LCD display.
SPD-108 - Solid State Tachmometers
The SPD-108 is a solid-state, intrinsically safe tachometer with a gate time range (0.13 to 2.85 sec) that is field- programmable.
SPD-108L - Solid State Intrinsically Safe Tachometers
The SPD-108L is a solid- state, tachometer with a gate time range (0.13 to 2.85 sec) that is field-programmable. It is well-sealed for rugged indoor and outdoor applications.
MTH-103D - 5 Digit Digital Tachometer
The MTH-103D Digital Tachometer is a microprocessor-based, 5-digit tachometer, hourmeter, and trip. The trip can be programmed to activate on overspeed, underspeed (Class C), or hours
F-16 - Signal Generator/Counter/Calibrator
Used to calibrate tachometers, digital speed indicators, governors, counters, frequency meters. Measures signal frequency from magnetic pickups, pulsers, ac generators, shaft encoders. Eliminates the need for a frequency counter or an audio generator.
DS-800 - 4 Digit Digital Tachometer
The DS-800 4 Digit Tachometer displays any speed or rate information (RPM, GPM, IPS, etc) on a large 4-digit LED.
DS-900 - Digital Speed Indicator
The DS-900 is a Digital Speed Indicator that displays any speed or rate information (RPM, GPM, IPS, etc) on a large 4-digit LCD.
SPD-700 - Speed Rate Meter
The SPD-700 is a digital tachometer and rate meter with a field-programmable gate time range (0.26 to 5.70 seconds).
SPD-708 - Digital Rate Meter
The SPD-708 is a Digital Rate Meter And Tachometer from Dynalco Controls with a field-programmable gate time range half that of the SPD-700 (0.13 to 2.85 seconds).
LST-100 - Low Speed Tachometers
The LST-100 is specially designed to display very low speeds. It features a field- selectable pulse rate multiplier that increases signal pulse rate by a factor of 10 or 100.
LST-100L - Very Low Speed Tachometers
It is a solid- state instrument that is well sealed for rugged indoor and outdoor applications. It has a large, lighted, 4-digit display. Gate time range: 0.13 to 2.85 seconds.)
LST-108 - Very Low Speed 4 Digit Tachometers
LST-100 Very Low Speed Tachometers is a solid- state instrument that is well sealed for rugged indoor and outdoor applications. It has a large, unlighted, 4-digit display. Gate time range: 0.13 to 2.85 seconds.
LST-108L - Low Speed 4 Digit Tachometers
The LST-108L Low Speed Tachometer features a field-selectable pulse rate multiplier that increases signal pulse rate by a factor of 10 or 100. It is a solid- state instrument that is well sealed for rugged indoor and outdoor applications.
DST-2000C - Direction Sensing Tachometers
The DST-2000C Direction Sensing Tachometer is capable of driving tachometers and up/down counters to provide rate information as well as total net flow, length, distance, etc.
PG-100 - RPM Pulser
The PG-100 RPM Pulser generates 60 pulses per revolution from an integral magnetic pickup (not included). It mounts directly on 0.50 to 1.25 inch (1.27 to 3.18 cm) diameter shafts using a removable taper lock bushing.
TT-1-- Tach Tape
TT-100 Tachometer Tape (Tach Tape) provides speed and frequency measurements from a magnetic pickup when only a smooth shaft or wheel is available.

Site Design: Process Controls And Instrumentation