Replace Sliprings with Mercotac Model 230

Model 230 Two Conductors, 30 Amps

Disconnects included (4 lg.) Boot kit available Available with stainless steel ball bearings (230-SS)


Model No.	Terminals	Voltage AC/DC	Amp Rating @240VAC	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation

230

0-250

200

<1m

1063

1800

140 (60) /-20(-29)

200

>25M

230-SS

0-250

200

<1m

1800

140 (60) /-20(-29)

200

>25M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

230 Accessories


55251 Terminal 16 - 14 AWG (qty. 2 included)		57230 Boot Kit for dust / splash protection IP51

	55250 16 - 14 AWG (qty. 2 incl 104F uded)

Terminals for other wire gauges available. (22-18 AWG and 12-10 AWG)

230 Standard Wire Connections

230 Wire Connections With Optional Boot Kit

230 Suggested Mounting Methods

Model 230 is typically mounted by the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

104E

Typical Body Mount Hole Dimensions
MODEL		HOLE DIAMETER () *	DEPTH
230 et al		.998" (25.35)	.80" (20)

Typical Bushing Mount Hole Dimensions
230 et al		.500" (12.70)	.40" (10)
*Inch (mm) Tolerance	+.001" (+.025)
	-.000" (-.000)