Disconnects included
(8 lg.)
Boot kit available
Available with stainless steel ball bearings (435-SS)
Model No.
Terminals
Voltage AC/DC
Amp
Rating @500VAC
Max.
Freq. MHz
Contact Resistance
Max. RPM
Temp Max. F (C) /
Min. F (C)
Rotation Torque (gm-cm)
Circuit Separation
435
4
0-500
30
100
<1m
300
140 (60) /-20(-29)
850
>50M
435-SS
4
0-500
30
100
<1m
300
140 (60) /-20(-29)
850
>50M
"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
435 Accessories
55250
16 - 14 AWG (qty. 4 included)
55251
Terminal 16 - 14 AWG
(qty. 4 included)
57435
Boot Kit for dust or splash protection
IP51
1064
Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)
435
Standard Wire Connections
435
Wire Connections With Optional Boot Kit
435 Suggested Mounting Methods
Model 435 is typically mounted
by either the black body or the white plastic
bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.
Typical Body Mount Hole Dimensions
MODEL
HOLE DIAMETER () *
DEPTH
435 et al
1.772" (45.00)
.80" (20)
Typical Bushing Mount Hole Dimensions
435 et al
1.250" (31.75)
.80" (20)
18A8
*Inch (mm) Tolerance
+.001" (+.025)
-.000" (-.000)
Installation Notes:
the up arrow should not point
below horizontal
do not solder to or bend connector
tabs
avoid lateral forces and
mechanical loads (overly stiff or tight wires)
do not rigid mount both ends of
connector
limit mounting eccentricity (runout
/ wobble) to .005" (.13mm)
435 Accessories
