-
MultiInput
Units offer 4 thermocouple inputs and 1 RTD input.As Hygrometer units use RTD input and humidity sensorwith 0-1vDC
(corresponds to 0-100% RH)
-
IndicatingAccuracy
Input:
Thermocouple: ±0.2% of full scale ±1digit
RTD: ±0.1% of full scale ±1 digit
Input:
Temperature/Humidity Sensor
Temperature: ±0.3ºC
Humidity: ±0.3% RH
-
InputSampling Rate
0.4 seconds
-
FunctionKey Settings
POWER key: turns DFT-700-M ON or OFF.
MODE key: holding this key for approximately1 second switches the measuring mode between regularand peak hold.
HOLD/RST key: holding this key retains thetemperature or humidity data at that time, pressingkey again resets the data.
MEMO key: pressing this key starts data memorymode.
SAVE key: pressing this key saves the measuredvalue indicated on the PV display.
LIGHT key: pressing this key turns the backlighton (backlight turns of in approximately 10 seconds).
-
PowerSupply
3v DC - 2 AA alkaline batteries. Battery life: Thermometer- 200 hours. Hygrometer - 100 hours.
-
Structure
Dimensions: W56 x H144 xD30mm.
Weight: Approximately 90 grams.
Dust-Proof/Drip-Proof: IP65 rated.
Specifications
