Heat Transfer Fluids: MultiTherm® Heat Transfer Fluids

MultiTherm Heat Transfer FluidsMultiTherm LLC has been a leading supplier of efficient, non-hazardous and non-toxic Heat Transfer Fluids since 1977. Within a temperature range of 1ºF to 600ºF, the company can successfully and economically accommodate a customer's heating or cooling requirements however exacting they may be. Further, MultiTherm provides troubleshooting help and a fluid analysis service to determine the physical and chemical condition of the fluid.


Featured Products From MultiTherm® Heat Transfer Fluids

MultiTherm OG-1® Heat Transfer Fluid
MultiTherm OG-1® is a hydrocracked base oil combined with the latest proprietary oxidation inhibitor/stabilizer. MultiTherm OG-1® was designed to meet the rising and demanding requirements of liquid phase open-loop heat transfer fluid system applications.

MultiTherm IG-1® Heat Transfer Fluid
MultiTherm IG-1® is a highly refined; hydrotreated mineral oil designed primarily for use in closed loop heat transfer systems. MultiTherm IG-1® is designed for use in systems that are equipped with expansion tanks, and it is recommended to have pressure relief valves and an inert gas blanket on the system. In properly designed systems it will provide troublefree, long lasting service.

MultiTherm FF-1® Flushing Fluid
MultiTherm FF-1® flushing fluid is for use in start-up or general maintenance of heat transfer fluid systems. During new equipment start-up, it is an economical way to remove loose material such as weld splatter, fines, particulate matter, etc.

MultiTherm PSC Plus®
MultiTherm PSC Plus® Cleaning Fluid is designed for use in general maintenance of larger heat transfer fluid systems. MultiTherm PSC-Plus® can be used with the Heat Transfer Fluid that is currently in the system or new flush fluid.

 

Food Grade Heat Transfer Fluids From MultiTherm®

MultiTherm PG-1®
MultiTherm PG-1® food grade mineral oil has been successfully used in over thirty-five different industries. In the Chemical Process Industry, it is used for temperature control of batch reactors, in heat recovery from process streams and exhaust gases and in large central systems where multiple heat users are involved. In the Food Process Industry, MultiTherm PG-1® is used in indirect heating loops for deep frying and baking.

Multitherm IG-4®
A variety of industries benefit from the use of MultiTherm IG-4®. In the Chemical Process Industry, it is used in central hot oil systems for heating all types of process equipment. In Asphalt Storage Facilities, the fluid is used for line tracing and tank heating. Die Temperature Control Systems benefit from its clean operation and high flash point. In Commercial Laundries, MultiTherm IG-4® provides higher throughput with a greater degree of safety in flat work ironers.

MultiTherm FF-1®
MultiTherm FF-1® flushing fluid is for use in start-up or general maintenance of heat transfer fluid systems. During new equipment start-up, it is an economical way to remove loose material such as weld splatter, fines, particulate matter, etc. left in lines and equipment, along with oil and some preservative coatings. It is useful for general maintenance purposes for removing particulate matter and used heat transfer fluid from a system prior to recharge or changeover from one fluid to another.

 

MultiTherm Heat Transfer Fluids Catalog

 


Multitherm® Products