Water-Based Heat Transfer Fluid MultiTherm WB®

   

 Typical Properties Table

 Composition: Dissolved ionic solids/water
 Appearance and Color: Clear to light blue

Property

US units

SI units

 Freeze Point

WB +14:

<-5°F

<-21°C

WB -5:

<-25°F

<-31°C

WB -22:

<-45°F

<-43°C

WB -40:

<-60°F

<-51°C

WB -58:

<-80°F

<-62°C

 Boiling Point

WB +14:

225°F

108°C

WB -5:

229°F

110°C

WB -22:

233°F

112°C

WB -40:

239°F

115°C

WB -58:

245°F

118°C

 Flashpoint: None

 Fire Point: None

 

 Recommended temperature range:

WB -58:

-58°F (-50°C) to 425°F (218°C)

WB -40:

-40°F (-40°C) to 425°F (218°C)

WB -22:

-22°F (-30°C) to 425°F (218°C)

WB  -5:

 -5°F (-20°C) to 425°F (218°C)

WB +14:

14°F (-10°C) to 425°F (218°C)

Water-Based Heat Transfer Fluid For Low-End Temperatures

MultiTherm WB® is a water-based heat transfer fluid engineered to deliver the desirable low-end temperature performance of synthetic organic and silicone-based fluids. Yet it safely exceeds the properties of familiar aqueous-based glycols to reach operating temperatures to below -5°F (-50°C). It’s non-toxicity combines with the high level of performance to provide a highly effective fluid, posing little risk to the environment, equipment or personnel. Five concentrations of MultiTherm WB® are available to serve a wide range of applications. However, custom formulations are available to satisfy special applications at any temperature between ambient and -80°F (-62°C).

 

Recommended temperature range:
WB -58: -58°F (-50°C) to 250°F (121°C)
WB -40: -40°F (-40°C) to 250°F (121°C)
WB -22: -22°F (-30°C) to 250°F (121°C)
WB -5: -5°F (-20°C) to 250°F (121°C)
WB+14: 14°F (-10°C) to 250°F (121°C)

 

Benefits at a Glance

  • Nontoxic

  • Nonflammable

  • Aqueous-based

  • Superior heat transfer characteristics

  • Attractive alternative to glycols and brines

 

Technical Information
For more technical, health and safety information or to request a Material Safety Data Sheet, contact our MultiTherm sales representative at:

Toll Free: 800-225-7440
Ph: 610-408-8361, Fax: 610-408-8365
or e-mail at TechInfo@MultiTherm.com.


Product Information | Physical Properties | MSDS | Technical Data



 


Warranty: MultiTherm® warrants that MultiTherm WB® conforms to the data set forth in this brochure. We present this information in good faith, but because we cannot control or anticipate the many different conditions under which our information and product may be used, no other warranty, expressed or implied, is given.

 


Multitherm® Products