For both air cooled or water cooled applications.
Units designed for mounting above 2 ft. x 4 ft. suspended
panel opening. Provides comfort and temperature control
for many types of areas.
Copper tube, aluminum fin, mounted in a stainless
steel drain pan.
Protected by thermal overload protection with both
high (manual reset) and low (automatic reset) pressure
switches. An expansion valve, a liquid line filter/dryer,
and a sight moisture indicator provide a completely
self-contained factory precharged refrigeration circuit.
3-Way Supply Air Diffuser And Return Air Grille
Shipped loose for "No Duct" units. Single
duct units only require a return air grille and double
units require neither.
3 Speed, long life motors for single phase operation.
Mean fast and easy installation. Isolation is always
an important factor for noise.
Stainless steel and elevated to allow for proper trapping
of condensate. Drain connections (3/4" f.p.t.)
are provided on each side of cabinet.
Provided for each drain pan to prevent overflow in
the event of a blocked drain line or if unit is not
installed in a level position. Switch is wired to
unit control panel.
Electrical Components to include: contactor (for AC
or WC units only), relay(s), control transformer and
power supply connections.
Forward curved, direct drive for both supply fan and
condenser fan (air cooled units only).
Standard on water cooled units. Rated at 150 PSIG.