Frigid-X™ Cabinet Cooler Air Conditioning System

Frigid-X™ Cabinet Cooler

Frigid-X™ Cabinet Cooler Operation

Filtered, compressed air enters the Frigid-X™ Cabinet Cooler and through the vortex tube component. The air is split into into two streams, one hot and one cold.

The muffled hot air from the vortex tube is expelled through the top of the air conditioner. The cold air is directed into the enclosure through the cold air distribution hose. Hot air inside the enclosure rises and exits to atmosphere via the air exhaust at a slight positive pressure. The enclosure is both purged and cooled with clean air. No outside air enters the enclosure.

Frigid-X™ Cabinet Cooler Advantages

• Low in cost
• Compact
• No CFC's
• Fast installation
• Stabilize enclosure temperature and humidity
• Virtually maintenance free (No Moving Parts)
• Mounts in a standard electrical knockout
• Stops heat damage and nuisance tripping
• Eliminates fans and filters
• Prevents dirt contamination by keeping enclosure at positive pressure
• Units applicable to all environments including high temperature to 200ºF

Frigid-X™ Cabinet Cooler Applications

• Computer Enclosures
• Frequency Drives
• CCTV Cameras
• NC/CNC Systems
• Scanners

Frigid-X™ Cabinet Cooler Selection

Cabinet Cooler Air Conditioning Systems Frigid-X™ comes with a 5 micron filter with an automatic drain for the compressed air supply to insure clean, dry air and an air distribution kit to circulate the cold air inside the enclosure for even cooling.

Cabinet Cooler Air Conditioning Systems Frigid-X™ is available with or without thermostat control.

When constant cooling and a constant positive purge is required we recommend the continuous operating version without the thermostat and solenoid valve. The cooling effect can be controlled by adding a regulator in line to reduce pressure for reduced cooling when it is not required and to conserve energy.

Systems utilizing a thermostat and solenoid valve saves air by activating the air conditioner only when the internal temperature reaches a critical level. The adjustable thermostat is factory set at 95°F but can be readjusted on site.

Thermostat and solenoid valve systems are recommended where the heat load can fluctuate (such as for frequency drives) and where a continual purge is not required. The thermostat and solenoid "package" can also be added at a later date to a continuous system.

Frigid-X™ Cabinet Cooler Sizing Specifications

Contact Nex Flow™ Technologies for assistance in sizing the Frigid-X™ Enclosure Coolers. Below see Sizing Specifications for the Frigid-X™ Enclosure Coolers.