RD4H-3/4 Extrusion Rupture Discs With 3/4 - 16 Mounting Thread

Extrusion Rupture Discs - RD4H-3/4

Description:

The RD4H-3/4 Extrusion Rupture Discs are designed for emergency relief of excess pressure in plastics processing machinery. It is designed to instantaneously rupture at a predetermined pressure.

The RD4H-3/4 Extrusion Rupture Discs have a 4" stem, Hex Head and a 3/4 - 16 UNF mounting thread. The RD4H-3/4 is available in a wide variety of burst pressures and is typically a stock item.

Downloads:

RD4H-3/4, Extrusion Rupture Discs, ONEhalf20, 3/4 - 16 Mounting Thread

Features:

  • Burst pressures from 1,500 to 9,5000 psi

  • All stainless steel body and disc

  • 3/4 - 16 UNF mounting thread

Benefits:

  • Low installation cost

  • Maintenance free

  • Intrinsically safe

What Else You Might Want To Ask (Click On Question):




About Onehalf20

Onehalf20 offers a complete line of Melt Pressure Transducers for extrusion and polymer processing. All units feature as standard the 6 pin Bendix style bayonet connector, and offer the industry standard 3.33 mV/Volt output.

Melt Pressure Transducers from Onehalf20 are also avaialble for food and medical processing applications. Our melt pressure transducers are fully compatible with all melt pressure transducers incorporating the Bendix six pin bayonet connector.

Sitemap

Extruder Rupture Disks

Onehalf20 Extruder Rupture Disks (Burst Plugs) are primarily used on Plastics Extrusion Machinery to provide emergency pressure relief. Extruder Rupture Disks from ONEhalf20 are designed to instantaneously rupture at a pre-determined pressure. Extruder Rupture Disks are leak tight and intrinsically safe devices that require no maintenance.

Onehalf20 Extruder Rupture Disk assemblies are manufactured from 304 SS and incorporate either an Inconel or Stainless Steel Disk which minimize the affects of varying processing temperatures.

Melt Pressure Transmitters

Onehalf20 offers a complete line of Melt Pressure Transmitters for extrusion and polymer processing. All units feature as standard the 6 pin Bendix style bayonet connector, and offer either 4-20mA or 0-10Vdc output.

Melt Pressure Transmitters from Onehalf20 are also avaialble for food and medical processing applications. Our melt pressure transmitters are fully compatible with all melt pressure transmitters incorporating the Bendix six pin bayonet connector.

Get in Touch