IPT144 Melt Pressure and Temperature Indicator from ONEhalf20

Melt Pressure and Temperature Indicator - IPT144

Description:

The IPT144 Melt Pressure and Temperature Indicator offers a field selectable display and up to three configurable alarms, the indicator has dual LED simultaneous display of melt pressure and temperature. The IPT144 also offers optional 4-20mA or 0-10Vdc process pressure value re-transmission and MODbus communications.

The IPT144 melt pressure and temperature indicator is a standard 1/4 DIN
(96 X 96mm) package and is only 100mm deep.

Downloads:

IPT144,Melt,Pressure,Temperature,Indicator,ONEhalf20

Features:

  • 350 Ohm strain gauge input and thermocouple input, scaleable units

  • Low cost unit with pushbutton programming and calibration feature

Common Options:

  • 24 Vdc power

  • MODBUS communications

What Else You Might Want To Ask (Click On Question):


About Onehalf20

Onehalf20 offers a complete line of Melt Pressure Transducers for extrusion and polymer processing. All units feature as standard the 6 pin Bendix style bayonet connector, and offer the industry standard 3.33 mV/Volt output.

Melt Pressure Transducers from Onehalf20 are also avaialble for food and medical processing applications. Our melt pressure transducers are fully compatible with all melt pressure transducers incorporating the Bendix six pin bayonet connector.

Sitemap

Extruder Rupture Disks

Onehalf20 Extruder Rupture Disks (Burst Plugs) are primarily used on Plastics Extrusion Machinery to provide emergency pressure relief. Extruder Rupture Disks from ONEhalf20 are designed to instantaneously rupture at a pre-determined pressure. Extruder Rupture Disks are leak tight and intrinsically safe devices that require no maintenance.

Onehalf20 Extruder Rupture Disk assemblies are manufactured from 304 SS and incorporate either an Inconel or Stainless Steel Disk which minimize the affects of varying processing temperatures.

Melt Pressure Transmitters

Onehalf20 offers a complete line of Melt Pressure Transmitters for extrusion and polymer processing. All units feature as standard the 6 pin Bendix style bayonet connector, and offer either 4-20mA or 0-10Vdc output.

Melt Pressure Transmitters from Onehalf20 are also avaialble for food and medical processing applications. Our melt pressure transmitters are fully compatible with all melt pressure transmitters incorporating the Bendix six pin bayonet connector.

Get in Touch