IPT258MA or V Melt Pressure & Temperature Indicator with Process & Thermoucouple Input

Melt Pressure & Temperature Indicator - IPT258MA or V

Description:

The IPT258 Melt Pressure & Temperature Indicator with either 4-20mA or 0-10Vdc process input and type J, K, or E thermocouple input for simultaneous dual 5 digit display of melt presure & temperature. The IPT258 is available with up to three programmable alarms, 4-20mA or 0-10Vdc process value re-transmission, and MODbus communications.

The IPT258 Melt Pressure & Temperature Indicator offers simplified user functionality with front panel buttons for Zero, Peak, and Manual Alarm Reset. The IPT258 Melt Pressure & Temperature Indicator is a compact 1/8 DIN (96 x 48 mm) package.

Downloads:

Melt Pressure Indicators

Features:

  • 4-20mA or 0 - 10 Vdc process input and J, K, or E thermocouple input

  • Low cost unit with pushbutton or Windows based programming

  • PSI, bar, MPa, Kgf/cm2, ºC or ºF user selectable units of measure

  • 5 digit dual display with 1 PSI, 0.1º resolution

  • Peak detection for both melt pressure and temperature

  • Built-in transmitter 20Vdc power supply

Benefits:

  • dual pressure & temperature display

  • Easy-to-use

  • Simplified calibration

  • Pressure value re-transmission

  • Auto-Zero button

  • 1/8 DIN saves panel space

What Else You Might Want To Ask (Click On Question):


Extruder Rupture Discs, Extruder Rupture Disc, Extruder, Rupture, Discs, Disc

About Onehalf20

Onehalf20 offers a complete line of Melt Pressure Transducers for extrusion and polymer processing. All units feature as standard the 6 pin Bendix style bayonet connector, and offer the industry standard 3.33 mV/Volt output.

Melt Pressure Transducers from Onehalf20 are also avaialble for food and medical processing applications. Our melt pressure transducers are fully compatible with all melt pressure transducers incorporating the Bendix six pin bayonet connector.

Sitemap

Extruder Rupture Disks

Onehalf20 Extruder Rupture Disks (Burst Plugs) are primarily used on Plastics Extrusion Machinery to provide emergency pressure relief. Extruder Rupture Disks from ONEhalf20 are designed to instantaneously rupture at a pre-determined pressure. Extruder Rupture Disks are leak tight and intrinsically safe devices that require no maintenance.

Onehalf20 Extruder Rupture Disk assemblies are manufactured from 304 SS and incorporate either an Inconel or Stainless Steel Disk which minimize the affects of varying processing temperatures.

Melt Pressure Transmitters

Onehalf20 offers a complete line of Melt Pressure Transmitters for extrusion and polymer processing. All units feature as standard the 6 pin Bendix style bayonet connector, and offer either 4-20mA or 0-10Vdc output.

Melt Pressure Transmitters from Onehalf20 are also avaialble for food and medical processing applications. Our melt pressure transmitters are fully compatible with all melt pressure transmitters incorporating the Bendix six pin bayonet connector.

Get in Touch