Melt Pressure Transducers from ONEhalf20

Melt Pressure Transducers - 3.33 mV/Volt Standard Output

 Photo

Standard Configuration

Details

Data Sheet

Request
Information

Melt Pressure Transducers, ONEhalf20

6" Rigid Stem
6 Pin Connector
1/2-20 UNF Thread

Melt Pressure Transducers, ONEhalf20

6" Rigid Stem
6 Pin Connector
Type J Thermocouple
1/2-20 UNF Thread

Melt Pressure Transducers, ONEhalf20

6" Rigid Stem
18" Flexible Capillary
6 Pin Connector
1/2-20 UNF Thread

Melt Pressure Transducers, ONEhalf20

6" Rigid Stem
18" Flexible Capillary
6 Pin Connector
Type J Thermocouple
1/2-20 UNF Thread


Specialty Melt Pressure Transducers - 3.33 mV/Volt Standard Output

 Photo

Standard Configuration

Details

Data Sheet

Request
Information

Melt Pressure Transducers, ONEhalf20

1.5" Jam Nut
10" Exposed Capillary
18" Flexible Capillary
6 Pin Connector

Melt Pressure Transducers, ONEhalf20

1.5" Jam Nut
28" Flexible Capillary
6 Pin Connector


Melt Pressure Transducers - 3.33 mV/Volt Standard Output And Visual Indication

Melt Pressure Transducers with Visual Indication

RTG and CTG w/Thermocouple

ONEhalf20 also offers Melt Pressure Transducers with Visual Indication that are ideally suited for processors who require local pressure indication at the extruder barrel.

Melt Pressure Transducers with Visual Indication are available in two unique styles. The CTG style features a 6" rigid stem and 30" of flex capillary. The RTG style has only a 6" rigid stem. Other configurations of these two styles are also available. Both styles offer the industry standard Bendix style 6 pin connector, 3.33 mV/Volt output and a 1/2-20 UNF thread for installation in standard transducer mounting holes.

Melt Pressure Transducers, ONEhalf20

About Onehalf20

Onehalf20 offers a complete line of Melt Pressure Transducers for extrusion and polymer processing. All units feature as standard the 6 pin Bendix style bayonet connector, and offer the industry standard 3.33 mV/Volt output.

Melt Pressure Transducers from Onehalf20 are also avaialble for food and medical processing applications. Our melt pressure transducers are fully compatible with all melt pressure transducers incorporating the Bendix six pin bayonet connector.

Sitemap

Extruder Rupture Disks

Onehalf20 Extruder Rupture Disks (Burst Plugs) are primarily used on Plastics Extrusion Machinery to provide emergency pressure relief. Extruder Rupture Disks from ONEhalf20 are designed to instantaneously rupture at a pre-determined pressure. Extruder Rupture Disks are leak tight and intrinsically safe devices that require no maintenance.

Onehalf20 Extruder Rupture Disk assemblies are manufactured from 304 SS and incorporate either an Inconel or Stainless Steel Disk which minimize the affects of varying processing temperatures.

Melt Pressure Transmitters

Onehalf20 offers a complete line of Melt Pressure Transmitters for extrusion and polymer processing. All units feature as standard the 6 pin Bendix style bayonet connector, and offer either 4-20mA or 0-10Vdc output.

Melt Pressure Transmitters from Onehalf20 are also avaialble for food and medical processing applications. Our melt pressure transmitters are fully compatible with all melt pressure transmitters incorporating the Bendix six pin bayonet connector.

Get in Touch