CTO6MA or V Oil Filled Melt Pressure Transmitter from ONEhalf20

Oil Filled Melt Pressure Transmitter - CTO6MA or V

Description:

The CTO6MA or V Oil Filled Melt Pressure Transmitter is designed specifically for food, packaging and medical processing applications. The unit features either 4-20mA or 0-10Vdc output, and offers pin-to-pin compatibility with all competitors models utilizing the Bendix style 6 pin bayonet connector.

The CTO6MA or V Oil Filled Melt Pressure Transmitter comes standard with a 6" rigid stem, 18" flexible capillary, and 1/2-20 UNF thread for mounting in standard transducer mounting holes.

Downloads:

CTO6MA or V,Oil,Filled,Melt,Pressure,Transmitter,ONEhalf20

Features:

  • Fill material meets FDA, USDA requirements

  • 4-20mA or 0-10Vdc, with zero and span adjustments, 1% accuracy

  • Internal 80% shunt calibration

  • All welded all stainless steel construction

Common Options:

  • Flexible capillary to 30"

  • M18 X 1.5 mounting

  • 12" rigid stem

  • 8 pin connector

What Else You Might Want To Ask (Click On Question):


Extruder Rupture Discs, Extruder Rupture Disc, Extruder, Rupture, Discs, Disc

About Onehalf20

Onehalf20 offers a complete line of Melt Pressure Transducers for extrusion and polymer processing. All units feature as standard the 6 pin Bendix style bayonet connector, and offer the industry standard 3.33 mV/Volt output.

Melt Pressure Transducers from Onehalf20 are also avaialble for food and medical processing applications. Our melt pressure transducers are fully compatible with all melt pressure transducers incorporating the Bendix six pin bayonet connector.

Sitemap

Extruder Rupture Disks

Onehalf20 Extruder Rupture Disks (Burst Plugs) are primarily used on Plastics Extrusion Machinery to provide emergency pressure relief. Extruder Rupture Disks from ONEhalf20 are designed to instantaneously rupture at a pre-determined pressure. Extruder Rupture Disks are leak tight and intrinsically safe devices that require no maintenance.

Onehalf20 Extruder Rupture Disk assemblies are manufactured from 304 SS and incorporate either an Inconel or Stainless Steel Disk which minimize the affects of varying processing temperatures.

Melt Pressure Transmitters

Onehalf20 offers a complete line of Melt Pressure Transmitters for extrusion and polymer processing. All units feature as standard the 6 pin Bendix style bayonet connector, and offer either 4-20mA or 0-10Vdc output.

Melt Pressure Transmitters from Onehalf20 are also avaialble for food and medical processing applications. Our melt pressure transmitters are fully compatible with all melt pressure transmitters incorporating the Bendix six pin bayonet connector.

Get in Touch