IP258MA or V Pressure Indicator With Process Input

Pressure Indicator With Process Input - IP258MA or V

Description:

The ONEhalf20 IP258 Pressure Indicator with either 4-20mA or 0-10Vdc process input and dual 5 digit display features high accuracy and simplicity of operation. The IP258 is available with up to three programmable alarms, 4-20mA or 0-10Vdc process pressure value re-transmission, and MODbus communications.

The IP258 Pressure Indicator offers simplified user functionality with front panel buttons for Zero, Peak, and Manual Alarm Reset. The IP258 Pressure Indicator is a compact 1/8 DIN (96 x 48 mm) package with a large 0.5 inch LED display for process pressure indication.

Downloads:

Melt Pressure Indicators

Features:

  • 4-20mA or 0 - 10 Vdc process input

  • Low cost unit with pushbutton or Windows based programming

  • PSI, bar, MPa, Kgf/cm2, user selectable units of measure

  • 5 digit display with 1 PSI resolution and Peak detection

  • Built-in transmitter 20Vdc power supply

Benefits:

  • Direct accurate pressure readings

  • Easy-to-use

  • Simplified calibration

  • Analog re-transmission

  • Auto-Zero button

What Else You Might Want To Ask (Click On Question):


Extruder Rupture Discs, Extruder Rupture Disc, Extruder, Rupture, Discs, Disc

About Onehalf20

Onehalf20 offers a complete line of Melt Pressure Transducers for extrusion and polymer processing. All units feature as standard the 6 pin Bendix style bayonet connector, and offer the industry standard 3.33 mV/Volt output.

Melt Pressure Transducers from Onehalf20 are also avaialble for food and medical processing applications. Our melt pressure transducers are fully compatible with all melt pressure transducers incorporating the Bendix six pin bayonet connector.

Sitemap

Extruder Rupture Disks

Onehalf20 Extruder Rupture Disks (Burst Plugs) are primarily used on Plastics Extrusion Machinery to provide emergency pressure relief. Extruder Rupture Disks from ONEhalf20 are designed to instantaneously rupture at a pre-determined pressure. Extruder Rupture Disks are leak tight and intrinsically safe devices that require no maintenance.

Onehalf20 Extruder Rupture Disk assemblies are manufactured from 304 SS and incorporate either an Inconel or Stainless Steel Disk which minimize the affects of varying processing temperatures.

Melt Pressure Transmitters

Onehalf20 offers a complete line of Melt Pressure Transmitters for extrusion and polymer processing. All units feature as standard the 6 pin Bendix style bayonet connector, and offer either 4-20mA or 0-10Vdc output.

Melt Pressure Transmitters from Onehalf20 are also avaialble for food and medical processing applications. Our melt pressure transmitters are fully compatible with all melt pressure transmitters incorporating the Bendix six pin bayonet connector.

Get in Touch