Reverse,Osmosis,Filtration,System,Flowmatic

Reverse Osmosis Filtration System from Flowmatic


  Process Controls Index

  Pelmar Products
  Compressed Air
  Manufacturers
  Offices
Reverse Osmosis Filtration System from Flowmatic
Reverse Osmosis
 

Removes the widest
spectrum of drinking water
contaminants for great
tasting, more healthy
drinking water.
 

 

Residential RO Systems from Flowmatic® in generic packaging
 

FMRO4J four stage system with conventional compression fittings

FMRO4G four stage system with
genuine John Guest
® fittings

FMRO5G five stage system
FMRO5GP five stage with booster pump
 
SPECIFICATIONS


MODEL NUMBER

STAGE


FITTINGS


TUBING*

 
Standard models
FMRO4J
4
Compression
1/4"
FMRO4G
4
John Guest®
3/8"
FMRO5J
5
Compression
3/8"
FMRO5G
5
John Guest®
3/8"
Booster pump models
FMRO5GP-115V
5
John Guest®
3/8"
FMRO5GP-220V
5
John Guest®
3/8"
Model with permeate pump
FMRO4G-ERP
4
John Guest®
3/8"
 
*From tank to faucet.
Feed water quidelines
 
Maintenance & warranty

Maximum TDS

2,000 ppm

Iron, max

0.3 ppm

Hardness, (less than)

15 gpg

Hydrogen sulfide

0.0 ppm

Manganese, (less than)

0.05 ppm

Turbidity, (less than)

1 NTU

Pressure, min. / max, psi

30 / 100

Temperature, range (F)
40° / 100°
pH
3-11
  Pre and post filters
Recommended change every six months
for regular usage, or once a year in light usage.

RO membrane
Change recommended based on periodic TDS
rejection tests. Typical is every two years.

Warranty
Components are warranted for one year from
installation, excluding membrane, pre & post
filters. See installing dealer for system warranty.
Note: Pretreatment suggested if conditions exceed parameters.    
Specifications
Tested for quality performance

Production

50 gals. per day

Storage tank

ROPRO4® * (2.6 glas.)

Membrane

Filmtec® by Dow Corp.

Sediment pre-filter

5 micron spun cartridge

Activated carbon pre-filter

NSF listed solid block carbon

Activated carbon post filter

AICRO*

Filter Housings

Flowmatic FH4200WW*

Faucet
Lead Free**
Fittings
J, compression; G, push-on
All reverse osmosis system
are fully tested at the factory
for quality assurance. QC
tests include flow, pressure,
storage tank integrity and
pressure; functional tests
for shut off valves, check
valves & other components;
and rejection tests of total
dissolved solids for systems
with factory installed
membranes.
Component certified for materials & structural integrity.
**Meets CA req.

Caution:
Do not use where water is microbiologically unsafe or with water
of unknown quality without adequate disinfection before or after the unit.
System must be maintained according to manufacturer's instructions.


Reverse Osmosis Brochure


Site Designed By Panther Marketing & Design