Construction and Finish to Industrial, Food, Dairy, and Pharmaceutical Standards
Kason circluar screen separators meet various regulations established by the FDA, 3-A Dairy Sanitary, BISSC, EEC and other governmental and industry groups.
 Clamshell Lid
For rapid screen changes, easy washdown
- Permits fast and easy changing of screens; the entire screen changing operation takes only several minutes, and requires less personnel.
- Accomodates mounted screens with or without center tensioning construction.
- Permits screen changing on single- or multi- deck circular vibratory screeners.
- Allows for screen decks with or without anti-blinding devices.
- The Kason Quick Screen Change Assembly is the only deck opening device supporting all these standard options.
Auto-Lubrication System
 The Auto-Lube pressure feeds lubricant into motor bearings for 6 to 12 months between reservoir replacements.
Continuous lubricant flow flushes the race of wear materials, broken down lubricant and contaminants, and minimizes dead spots of unused lubricant.
Optional on Vibroscreen separators in 48" (1220mm) and larger diameters. Can be retrofit in one hour to any circular vibratory screener.
Clean In Place Spray Heads
 These perforated, ball-shaped, stainless steel spray nozzles, positioned at the end of stainless steel pipes, provide multi-directional spraying of cleaning and rinsing fluids, simplifying the cleaning of circular separator interiors.
The pipes extend outward from the screen deck frames and upward from the top surfaces. Their flanged connections ensure leak-free connection to hoses carrying cleaning solution.
Ultrasonic Anti-Blinding Device
 The patented Kasonic® anti-blinding device allows sifting as fine as 25 microns (500 mesh) on any circular vibratory screener of 18 to 100" (2540 mm) diameter.
It transmits ultrasonic frequencies(adjustable) to the screen, adjusting power automatically according to screen loads.
It operates with standard screens, reducing cost, and is supported independent of screen, prolonging screen life.
Wiper Blade Assembly
 The wiper blade assembly prevents screen blinding and boosters capacity by breaking down lumps and agglomerates.
The independently mounted assembly allows adjustment of wiper blade height above or at the screen surface, and adjustment of blade speed from 1 to 15 RPM.
Rubber wiper blades or bristle burshes can be affixed to agitator shaft arms.
Kleen Screen™ Rings
 Kason Kleen-Screen™ Rings prevent screen blinding by fibrous, stringy, and sticky materials.
Controlled clearances within the separator, and multiplane inertial vibration combine to create shearing actions which cut fibers and scrape away gummy materials.
Hollow rings promote product flow over the entire screen surface.
Ball Tray Anti-Blinding Device
 The Kason Ball Tray assembly is an anti-blinding system that is especially appropriate for near size, dry material screening applications.
A ball support screen is mounted below the operating screen. The vibration of the separator activates the elastomeric balls which bounce continuously against the underside of the operating screen.
The impact of the balls flexes the operating screen, dislodging near size particles to keep the screen clean.
Four Finger Flex Wiper
 The Kason Four-finger Flex Wiper anti-blinding device is a top side cleaner used to prevent blinding of the operating screen by slimes, pitch, etc.
The unit consists of a series of four neoprene radial arms that wipers thoroughly clean the top side of the operating screen.
Specially designed units are available for extra difficult materials. The mechanism is actuated by the inertial vibration of the Kason Vibroscreen.
Flexible, See-Through Dust Cover
 The dust cover makes the upper screen visible for inspection, permits the user to witness the material flow pattern on the screen, and provides easy access to the top deck.
|
