Primary Sweep Type Sampler Ramsey Model SWAX-7000 From Thermo Scientific

Primary,Sweep,Type,Sampler,Ramsey,Model SWAX-7000,Thermo,Scientific

The Ramsey Model SWAX-7000 Primary Sweep Type Sampler offers an economical and simple means to procure a representative sample directly from material on a conveyor belt. With over 1,000 units in service worldwide, it has been subjected to rigorous in-the-field testing and meets ASTM and ISO specifications.

Product Detail

This sampler can be used as a stand-alone sampling device or as a primary in a multi-stage mechanical sampling system. Direct increments are obtained from in-motion, horizontal or inclined conveyors. It is ideally suited for the sampling of coal, limestone, ferrous and non-ferrous ores, sand, crushed rock and gravel. In high tonnage applications, the cutter is counterbalanced to prevent excessive stress on the conveyor.

Features and Benefits

  • Compact design is well-suited for low headroom installations.

  • Ease of installation results in modest installation costs.

  • Mounts directly to existing or new conveyors. No transfer point is required.

  • Rigid construction of tubular structural steel maintains positive alignment.

  • Direct drive for positive stopping whether the belt is loaded or empty.

  • Skirtboards on sampler prevent material spillage.

  • Cost efficient. Small primary increment means smaller, less expensive equipment in the reduction stages of system.

  • Non-contact proximity switches for start-stop control.

  • Replaceable steel brushes and urethane wiper assure fines will be removed and included in representative sample.

  • Samplers counterweighted to eliminate high eccentric loading on 36" and larger belts.

SWAX-7000 Data Sheet (322 Kb)