Ramsey Safety Cable Pull Switch
from Thermo Electron Corporation

Protect employees, your plant and your process line with the Ramsey Safety Cable Pull Switch. It is applied to the pull cable at any position, which causes the actuating arm to rotate 20° to a tripped-locked position when shut-off is needed. It will stay locked in the alarm position until manually reset.

For Emergency or Normal Shut-Off

A safety pull cable is attached to the actuating arm of the Ramsey Safety Cable Pull Switch and terminated at fixed mounts at either end of a conveyor. Force applied to the pull cable at any position causes the actuating arm to move into a tripped-locked position and activates an alarm from one DPDT or two SPDT micro-switches, alerting equipment circuits of the stop condition. This will stay locked until manually reset by the reset lever.

Options

• Universal mounting plate
• Secondary flag alarm
• Complete hook-up accessories including: cable, clamps, standoffs, lights
• NEMA-4 and NEMA 9 Alarm Light
• Special finishes for highly corrosive conditions
• European tension spring-loaded mounted hardware
  

Download Pro-Line Safety Cable Pull Switch (448 Kb)