Both direct drive and gear driven units are available. The direct drive series (FRH-C) is recommended for moderate shear applications and features 316SS Square pitch propellers as standard. The gear driven series (FRG-C) is recommended for high flow, low shear applications and features 316SS XTF-3 High Efficiency Impellers as standard. Output speeds of 1750 RPM, 400 or 264 RPM depending on your application requirements.

All motors are standard Baldor NEMA C-faced design assuring off-the-shelf replacement. Options include explosion proof, chemical duty or high efficiency.

• 1750 RPM Output Speed for Direct Drive FRH models.
• 400 or 264 RPM Output Speed for FRG models 
• FRH models feature 316SS Square pitch propellers as standard.
• FRG models feature 316SS XTF-3 High Efficiency Impellers as standard. 
• FRH models recommended for moderate shear applications. 

• FRG models recommended for high flow, low shear shear applications.

MOTORS

Standard 115/230/60/1 or 208/230/460/60/3, TEFC. 

Optional 1150 or 264 RPM motors available. 

Optional Explosion proof, Chemical Duty, Washdown, or High Efficiency available.

Optional 50 Hz and Special Voltages available

Optional Air Motors - 1/4 - 3 HP. 

Optional Air Lubrication Sets and Needle valves for Air Motors. 

Optional AC & DC Variable Speed Drives

FEATURES

100% Process Guarantee

3 Year Mechanical Warranty

All Motors are Standard NEMA C-Face Design

Gears on FRG Series rated for a minimum service factor of 1.5

10° Angle Riser Mounting Option for Un-baffled Tanks.

Standard Anti-vibration mounts on all models to dampen vibration & increase mixer life

All 316SS Impellers and Shafts.

Coatings (PVC, Rubber /Others on Request)

USDA Approved Sanitary Versions Available

OSHA Approved for Safety

FRH Direct Drive Models