Chlorination Systems

PPG Main Index

Commercial

Industrial

PowerPro Chlorination Systems from Accu-Tab


The PowerPro® system includes all components necessary for a turnkey chlorination system and is easily adaptable for automatic control.

Because it's calcium hypochlorite-based, the compact PowerPro system does not require a separate entry building or room as is the case with chlorine gas, and it takes up a fraction of the space required for a similar bleach system.  As a result, our system can be installed in smaller, more convenient locations, increasing operational efficiency and reducing chemical delivery problems. 

There are two types of PowerPro systems available:  gravity return and pressure return.

 PowerPro, Chlorination Systems, Accu-Tab


PowerPro, Chlorination Systems, Accu-Tab


Gravity Return

PowerPro, Chlorination Systems, Accu-TabA gravity return system can be specified when the chlorine effluent is to be returned to the main water stream in an open tank, channel, or filter and when the chlorinator can be physically located at an elevation higher than the re-injection point.

The system routes a sidestream of the main water flow through a simple rotameter and valve used to adjust the flow of the chlorinator. The water contacts only the tablets at the bottom of the feeder, so tablets at the top stay dry while those contacting the water erode at a predictable rate according to the amount of water that enters the chlorinator. Highly accurate chlorine dosage is achieved simply by controlling the water flow rate.

Because nothing moves but the water, the PowerPro gravity return system represents the ultimate in reliability with negligible capital costs. The non-pressurized system also eliminates the potential of chlorinated solution spraying out of a corroded or broken pipe.

PowerPro Gravity Return Systems

Model

Chlorine Delivery Range(lbs./hr.)

Tablet Capacity(lbs.)

Unit Dimensions(WxLxH)

Unit Inlet/Outlet Size

3012*

Up to 0.5

12

29" x 39" x 53"

3/4" / 1"

3075*

0.3 - 2

75

29" x 39" x 53"

1" / 2"

3150*

1 - 12

150

29" x 39" x 53"

1" / 3"

*Chlorinators are NSF Standard 61 listed.

Available options for PowerPro gravity return systems include the following:

  • Residual control
  • Flow proportion control
  • Compound loop control
  • Installed weight scale
  • SCADA compatible for:
  • Remote start
  • 4-20 mA scale outpu
  • 4-20 mA flow meter output

Pressure Return

PowerPro, Chlorination Systems, Accu-TabA pressure return system is required when the chlorinator effluent must be directed to multiple locations or when the chlorinated stream is to be re-injected to a pressurized tank or line.

Our PowerPro pressure return system removes a sidestream of the main water flow and introduces a portion of it into the chlorinator, where Accu-Tab tablets are eroded at a controlled rate. A centrifugal pump re-injects the resulting chlorinated solution back into the main water line. This sidestream loop is nearly identical to the familiar chlorine gas injection system but without the danger and the hassle.

Each PowerPro pressure return system comes complete with valves, piping, pumps, surge tanks, and the electronic controls necessary to dose the desired amount of chlorine into the main water system. Systems are also available with multiple chlorinators, automatic controllers, and SCADA compatibility.

PowerPro Pressure Return Systems

Model

Chlorine Delivery Range(lbs./hr.)

Tablet Capacity(lbs.)

Unit Dimensions(WxLxH)

Solution Tank Capacity(U.S. gallons)

Unit Inlet/Outlet Size

3012*

Up to 0.5

12

27" x 55" x 50"

22

1"

3075*

0.3 - 2

75

27" x 55" x 50"

22

1"

3150*

1 - 12

150

27" x 55" x 52"

28

1"

3530

4 - 25

300

35" x 65" x 54"

45

1"

3550*

4 - 25

550

35" x 65" x 74"

45

1"

30600

10 - 35

600

35" x 65" x 57"

45

1"

301100

10 - 35

1,100

35" x 65" x 74"

45

1"

361000

10 - 35

1,000

41" x 71" x 57"

45

1"

Dual 3012*

Up to 1

24

27" x 55" x 50"

22

1"

Dual 3075*

0.3 - 4

150

35" x 65" x 50"

22

1"

*Chlorinators are NSF Standard 61 listed.

PowerPro pressure return units can be easily customized to your individual requirements. Available options include the following:

  • Residual control
  • Flow proportion control
  • Compound loop control
  • Pressure regulator (required for 70 psi or greater)
  • Field installed spare pump
  • Installed weight scale
  • 50 Hz power
  • SCADA compatible
  • Chlorinator dehumidifier

Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Pulsafeeder)


Pumps And Related Liquid Handling Equipment

About Us

Vissers Sales Corp. is a Canadian distributor and representative for liquid handling equipment related to the Chemical/Industrial market. We specialize in all types of pumps, mixers, valves, process controls, level and flow controls.

Sitemap

Our Products

Vissers Sales Corp. has a wide variety of liquid handling products for the Chemical and Industrial industries. Industrial Pumps, Flow Control Systems, Instrumentation Products, Industrial Mixers, Metering Accessories, Industrial Systems, Filtration Products and Tank Container Systems from the world's leading manufacturers

Website Content

Vissers Sales Corp. provides an indepth Directory of Industrial Pumps featuring Centrifugal Pumps, Positive Displacement Pumps, Drum Pumps, Metering Pumps, Tote Pumps from the world's leading manufacturers available at Vissers Sales Corp.. We offer a wide variety of products to meet your unique needs.

Get in Touch

  • CANADA TOLL FREE:
    1-800-367-4180
  • Phone:
    905-841-4073
  • Email:
    Email Us Here
  • Address:
    20-220 Industrial Parkway South
    Aurora, ON L4G 3V6
  • Website:
    www.visserssales.com