STANDARD PUMP's Batch Control Systems are engineered to control,
measure and dispense any volume of liquid from drums, IBCs,
plating tanks and any large storage vessel. They can be used
in any industry where batching, chemical packaging or dilution
is required to be accurate and efficient.
WASTE WATER TREATMENT
Simply enter the desired volume of liquid with
the directional arrows. Press ENTER and the Batch Control System
engages the motor, dispenses the required volume, then stops
the motor to complete the process.
Accuracy — within ±0.5%. Meter employs "Teach
In" calibration or preset "K factors" for various specific
gravities. No more estimating or using floor scales to
properly measure corrosive chemicals.
Safety — operator does not come in contact with
corrosive chemicals. No more drum tilting with fork lifts,
measurement with buckets or pails. Control transfer of
highly corrosive liquids from your storage container to
a mixing tank or process line.
Memory — Save up to 7 preset volumes in the Automatic
Batch memory or change each batch in the Manual Batch
Displays volume units in gallons, Imperial gallons,
liters, milliliters or cubic meters.
Displays flow rate in gallons, Imperial gallons,
liters, milliliters or cubic meters per minute, second,
Language can be displayed in English, German, French,
Italian or Spanish, as desired.
Available in PP or PVDF for complete chemical compatibility.
Available with standard pump tube lengths of 27"
(700 mm) carboys, 39" (1000 mm) drums, 47" (1200 mm)
tanks, 60" (1500 mm) IBCs and 72" (1600 mm) large
Batch Controller operates on 120V or 220V power.
Batch Control Motors are available in TEFC or ODP
for any corrosive environment. Both 60 Hz and 50 Hz
motors are available.
Efficient — system operates up to 25 GPM. Faster
transfer and measurement of liquid increases productivity
and lowers downtime.
Quick connection — 1" hose barb or 1" NPT thread
for ease in hose change or quick disconnect setup.
Maximum temperature — 175°F (80°C)
Maximum flow — 25 GPM (95 l/min)
Suction dimension — 1.63" (41 mm)
Maximum specific gravity — 1.89
Maximum viscosity — 1,500 cps
Discharge dimension — 1" (25.4 mm) hose barb or NPT thread