|
 SUMP-GARD®
vertical centrifugal pumps are available in lengths from 12
in. to 20 ft (.3 m to 6.1 m), and handle flows to 900 gpm (204
m3/hr), heads to 180 ft. (55 m) and temperatures to 275°F
(135°C).
All fluid contact components are injection molded
or fabricated of homogeneous polypropylene (PP), polyvinyl chloride
(PVC), chlorinated polyvinyl chloride (CPVC) and polyvinylidene
fluoride (PVDF) — corrosion resistant thermoplastics that
are chemically inert to the fluids they are specified to handle.
The heavy-duty stainless steel shaft is completely isolated
from the fluid by a thick-sectioned thermoplastic sleeve, eliminating
metal contact with the pumped fluid.
Unlike metals (including stainless steel, Hastelloy®
and other high alloys) that have annual corrosion rates, Vanton
thermoplastics do not, allowing all liquids to be handled free
of contamination, while maintaining the integrity of ultrapure
liquids.
SUMP-GARD® vertical pumps are ideal for handling
a broad range of corrosive, hazardous, toxic and otherwise aggressive
fluids used throughout the processing and manufacturing industries,
in utilities, and industrial and municipal water/wastewater
treatment facilities — virtually any acidic, caustic, hazardous
or unknown mixtures of waste/effluent or combination of fluids
across the entire pH spectrum collected in tanks and sump pits.
Every Vanton pump is fully tested to verify performance with
all data permanently recorded.
|
|
|
|
|
The industry standard for dependable thermoplastic
vertical pump design
|
|
|
|
|
Vanton SG models are available in polypropylene,
PVC, CPVC and PVDF. They can be furnished in sizes from
1x1 to 6x4, in lengths to 20 ft, for flows to 1450 gpm,
at heads to 245 feet and for use at temperatures to 275
F.
 For
more information on the SUMP-GARDŽ SG, click here.
Click
Here for Engineering Specifications
|
|
|
|
|
|
SGK cantilevered bearingless pump has
dry run capability
|
|
|
|
|
Vanton SGK cantilevered sump pumps feature
a large diameter, plastic sleeved, alloy steel shaft that
eliminates the need for immersed bearings or bushings,
allowing run-dry operation for extended periods. Rugged
epoxy-coated cast iron motor bracket accommodates NEMA,
IEC, and standard European motors. Lengths to six
feet (2 m) (deeper with tailpipe), flows to 1000 gpm (227
m3/hr) at heads to 210 feet (64 m).
For
more information on the SUMP-GARDŽ SGK, click here.
Click
Here for Engineering Specifications
|
|
|
|
|
|
SGL "Giraffe" design overcomes
depth and headroom restrictions
|
|
|
|
|
This patented construction of these thermoplastic
sump pumps keeps all wetted components, including the
segmented shaft sections and couplings, isolated from
fluid contact. It simplifies and reduces costs associated
with shipping, installation, and maintenance. In
addition, it makes lengths to 50 feet (15 m) practical,
and allows installation in areas with limited headroom.
The pumps handle flows to 1450 gpm (330 m3/hr)
against heads to 245 feet (85 m), and are available in
the same choice of materials as standard SG pumps.
Click
Here for Engineering Specifications
|
|
|
|
|
|
SGW vertical pump for semiconductor and
OEM applications
|
|
|
|
|
The SGW centrifugal pump is a very compact,
low-cost unit engineered for use with standard C-face
motors, and designed for simple washdown of the motor
area without contaminating the pumped product. It
is ideal for OEM applications due to high reliability,
long service life and low maintenance. It is the
preferred choice for computer chip and water production,
printed circuit board fabrication and other processes
involving ultrapure water and chemicals. Rated for flows
to 220 gpm (50 m3/hr) at heads to 125 feet
(38 m), lengths to 22 inches (.56 m).
Click
Here for Engineering Specifications
|
|
|
|
|
|
SGH integral pump/motor shaft design saves
space and reduces maintenance
|
|
|
|
|
SUMP-GARD SGH pumps feature integral pump/motor
shafts supported by large motor bearings. This low
profile design simplifies maintenance and allows easy
replacement of the plastic-sleeved stainless steel shaft.
Thermoplastic construction of all wetted components ensures
dependable pumping of corrosive and abrasive chemicals
and wastes, and eliminates metallic contamination.
Flows to 175 gpm (40 m3/hr), heads to 100 feet
(30 m), and lengths to 3 feet (.9 m).
Click
Here for Engineering Specifications
|
|
|
|
|
|
SGV vortex pump head for sludges, slurries
and solids laden fluids
|
|
|
|
 Vanton
SUMP-GARD pumps with recessed, dynamically balanced clog-free
impellers are suitable for a wide range of sludges and
slurries, and fluids with stringy materials or solids
to 3 inches (75 mm) in diameter. Wetted components
of homogeneous thermoplastics eliminate corrosion and
contamination, and minimize abrasion. SGV pumps are rated
for flows to 900 gpm (205 m3/hr) at heads to
240 feet (73 m), with actual performance determined by
the characteristics of the fluid being pumped.
|
|
