Submersible Sewage Pump Barnes Heavy Duty

Submersible, Sewage Pump, Barnes, Heavy DutySeries 3SE
1.1 through 2.0 hp
2 1.1" Solids Handling
1750 rpm
Single & Double Seal

Submersible, Sewage Pump, Barnes, Heavy Duty

Submersible Sewage Pump Specifications

Size 3" NPT vertical discharge
Pump Body Cast iron - Class 30
Motor Housing Cast iron - Class 30
Impeller 2 vane open, cast iron with pressure vanes on back side.
Hardware Stainless steel
Seal Single Seal Series: Mechanical type with ceramic and carbon faces, stainless steel hardware and Buna-N elastomer.
Double Seal Series: Mechanical type in tandem, oil filled chamber, carbon & ceramic faces, stainless steel hardware & Buna-N elastomer.
Square Rings Buna-N
Suitable for 104ºF (40ºC) liquids
Standard Equipment All models equipped with carrying handle and 20' (6m) of cable with quick plug in terminal plate. Single phase size 10/3 type "SOW". Three phase size 14/4 type "SOW"
Option Seal material, additional cable, temperature sensor & seal leak sensor on double seal only.

Submersible Sewage Pump Motor Specifications

Single Phase Completely oil filled with overload protection in motor - PSC (permanent split capacitor)
Three Phase Completely oil filled, overload protection provided in magnetic starter.
Motor Speed 1750 rpm
Insulation Class-B
Shaft Stainless Steel
Bearings Ball, oil lubricated
Electrical Ratings 230V-1hp:
1.1 hp 10.5A, 1.5 hp 12.6A, 2.0 hp 14.5A
1.1 hp 10.5A, 1.5 hp 13.3A, 2.0 hp 15.2A
1.1 hp 10.5A, 1.5 hp 11.6A, 2.0 hp 13.2A
1.1 hp 10.5A, 1.5 hp 5.8A, , 2.0 hp 6.6A
1.1 hp 10.5A, 1.5 hp 4.6A, 2.0 hp 5.2A