 Series SE & SEV
1/2 through 1 hp
2" Solids Handling
1750 rpm
Single & Double Seal
Pump Specifications
| Size |
2" & 3" NPT vertical discharge |
| Pump Body |
Cast iron - Class 30 |
| Motor Housing |
Cast iron - Class 30 |
| Impeller |
SE Series: 2 vane open, cast iron with pressure vanes on back side
SEV Series: Vortex - 12 vanes, cast iron with pressure vane on back side. |
| Hardware |
Stainless steel |
| Seal |
Single Seal Series: Mechanical type with ceramic and carbon faces, stainless steel hardware and Buna-N elastomer.
Double Seal Series: Mechanical type in tandem, oil filled chamber, carbon & ceramic faces, stainless steel hardware & Buna-N elastomer. |
| Square Rings |
Buna-N |
| Suitable for |
104ºF (40ºC) liquids |
| Standard Equipment |
All models equipped with legs, carrying handle and 20' (6m) of cable with quick plug in terminal plate. Single phase size 14/3 type "SJTW". Three phase size 14/4 type "SOW" |
| Option |
Seal material, additional cable, temperature sensor & seal leak sensor on double seal only. |
Motor Specifications
| Single Phase |
Completely oil filled with overload protection in motor - PSC (permanent split capacitor) |
| Three Phase |
Completely oil filled, overload protection provided in magnetic starter. |
| Motor Speed |
1750 rpm |
| Insulation |
Class-B |
| Shaft |
Stainless Steel |
| Bearings |
Ball, oil lubricated |
| Electrical Ratings |
115V-1hp: 1/2 hp 11.5A
230V-1hp: 1/2 hp 5.9A, 3/4 hp 8.9A, 1.0 hp 8.5A
208V-3hp: 1/2 hp 3.2A, 3/4 hp 4.8A, 1.0 hp 6.8A
230V-3ph: 1/2 hp 3.0A, 3/4 hp 4.4A, 1.0 hp 6.0A
460V-3hp: 1/2 hp 1.5A, 3/4 hp 2.3A, 1.0 hp 3.0A
575V-3hp: 1/2 hp 1.0A, 3/4 hp 1.6A, 1.0 hp 2.4A |
|
