Barnes Medium Head Heavy Duty Submersible Sewage Pumps

Barnes, Medium Head, Heavy Duty, Submersible Sewage PumpsSeries 2 SE
4/10 through 1 hp
2" Solids Handling
1750 rpm
Single Seal Secondary Exclusion Seal

Barnes, Medium Head, Heavy Duty, Submersible Sewage Pumps

Submersible Sewage Pump Specifications

Size 2" NPT vertical discharge
Pump Body Cast iron - Class 30
Motor Housing Cast iron - Class 30
Impeller 2 vane open, cast iron with pressure vanes on back side (4/10 - Zytel - Glass filled)
Hardware Stainless steel
Seal Mechanical type in oil filled chamber with secondary exclusion seal, ceramic and carbon faces, stainless steel hardware and Buna-N elastomer.
Suitable for 104ºF (40ºC) liquids
Standard Equipment All models equipped with legs, carrying handle and 20' (6m) of cable with quick plug in terminal plate. Single phase size 14/3 type "SJTW". Three phase size 14/4 type "SOW"

Submersible Sewage Pump Motor Specifications

Single Phase Completely oil filled with overload protection in motor - PSC (permanent split capacitor)
Three Phase Completely oil filled, overload protection provided in magnetic starter.
Motor Speed 1750 rpm
Insulation Class-B
Shaft Stainless Steel
Thrust Bearings Ball, oil lubricated
Radial Bearing Ball, oil lubricated
Electrical Ratings 115V-1hp: 4/10 hp 10.5A, 1/2 hp 11.5A
230V-1hp: 1/2 hp 5.5A, 1.0 hp 10.5A
208V-3hp: 1/2 hp 3.3A, 1.0 hp 6.0A
230V-3ph: 1/2 hp 3.0A, 1.0 hp 5.5A
460V-3hp: 1/2 hp 1.7A, 1.0 hp 2.7A
575V-3hp: 1/2 hp 1.4A, 1.0 hp 2.2A