Barnes Submersible Sump & Effluent Pumps - Delux All Cast Iron

Barnes, Submersible Sump, Effluent Pumps, Delux, Cast IronSeries EH & EHV

Applications:


Ideal for the removal of waste water where higher discharge head is required.

Barnes, Submersible Sump, Effluent Pumps, Delux, Cast Iron
Barnes, Submersible Sump, Effluent Pumps, Delux, Cast Iron
Model No.
Discharge NPT
hp
115
ph
Amps
EH-25
1-1/2
1/4
115
1
10.5
2EH-314L
2
1/3
115
1
6.5
2EHV-33IL
2
1/3
115
1
12.5
2EHV-412L
2
4/10
115
1
8.8

Barnes Submersible Sump & Effluent Pumps Specifications

Pump Body Cast iron - Class 30
Motor Housing Cast iron - Class 30
Impeller EHV: Vortex cast iron with pressure vanes on back side
EH: 2 vanes, cast iron with pressure vanes on back side
Hardware 300 series stainless steel
Shaft Seal Mechanical type with ceramic & carbon faces, stainless steel spring & Buna-N elastomer
Power Cord 20 ft. (6m) type "SITW" with molded plug - grounded
Automatic Operation A = Wide angle mechanical float (EH25A)
VF = Adjustable vertical float switch (EH25VF)

Barnes Submersible Sump & Effluent Pumps Motor Specifications

Motor Oil filled with automatic thermal protection
Insulation Class-B
Motor Speed EHV412 - 3250 rpm, EH-25, EHV331, EH314 - 1750 rpm
Shaft 1/2" diameter Stainless Steel
Thrust Bearings Ball, oil lubricated
Radial Bearing 314 & 412 Bearing
25 & 331 - Sleeve