Submersible Effluent Pumps Barnes Heavy Duty High Head

Submersible, Effluent Pumps, Barnes, Heavy Duty, High HeadSeries EHH 4/10 and 1.0 hp
Single Seal with Secondary Exclusion Seal

Submersible, Effluent Pumps, Barnes, Heavy Duty, High Head

Submersible Effluent Pumps Specifications

Sizes 2" discharge
Pump Body Cast iron - Class 30
Motor Housing Cast iron - Class 30
Impeller Open, 2 vane, cast iron with pressure vanes on back side
Hardware stainless steel
Seal Mechanical type in oil filled chamber with secondary exclusion seal, carbon ceramic faces, stainless steel hardware and Buna-N elastomer
Suitable for 104ºF (40ºC) liquids
Standard Equipment All models supplied with carrying handle and 20' (6m) of cable. single phase size 14/3 type "SJTW". Three phase size 14/4 type "SOW"

Submersible Effluent Pumps Motor Specifications

Single Phase PSC (Permanent Split Capacitor) completely oil-filled withoverload protection in motor.
Three Phase Completely oil filled. Protection required in magnetic starter.
Motor Speed 3450 rpm
Insulation Class-B
Shaft Stainless Steel
Thrust Bearings Ball, oil lubricated
Radial Bearing Ball, oil lubricated
Electrical Ratings 4/10 hp - 115V 1hp 11.5A
4/10 hp - 230V 1ph 5.8A
1.0 hp - 230V 1ph 9.3A
4/10 hp - 208V 3.3A, 230V 3.0A, 460V 1.5A & 575V 1.2A
1.0 hp - 208V 5.9A, 230V 5.4A, 460V 2.8A & 575V 2.3A