Carlon Cold Water Turbine Meter

Cold Water Turbine Water MeterHave a high volume application that requires a high degree of accuracy with low maintenance features? Then Carlon has a family of meters for you. Our cold water turbine meters are "in stock" in sizes from 2" to 8" and larger sizes up to 16" are available. Carlon turbine meters provide +/- 2% accuracy at flow rates from 2 GPM all the way up to 2240 GPM and 232 psi at temperatures from 35 to 104ºF. Our turbine meters are all available in totalizing and electric contact configurations so that you can run your other process equipment (Carlon valves, timers, controllers and chemical pumps) directly from our turbine meter.

Offering These Advantages and Options

  • Cold Water Meters sizes from 2" to 16"
  • All available in both Totalizing and Electric Contacting Models for the control of water treatment equipment, such as chemical feed pumps, timers, valves, etc.
  • Register can rotate 340 degrees for ease of reading meter after installation.
  • Optional Car-Logger units available for 4-20 mA analog current outputs to building system software
  • Optional Remote Digital Counters

Water Meter Connections

  • ANSI flange connections furnished with each meter up to 6".
    8" - 16" available upon request.

Product Details

Main Case: Epoxy Coated Cast Iron
Maximum Operating Pressure: 7 to 232 p.s.i.
Temperature Range: 35 - 104ºF
Accuracy: 2% of Flow Rate
Registration: U.S. Gallons
Electric Contacting Models: Maximum Switching Voltage 48 volts AC/DC Maximum Current .2 amps, 3 watts

Specifications for Cold Water Turbines

MODEL C200T/EC C250T/EC C300T/EC C400T/EC C600T/EC C800T/EC
Pipe Size 2" 2-1/2" 3" 4" 6" 8"
Flow Rate
in GPM
2-134 3-224 5-358 8-536 20-1340 33-2240
Gallon Per Contact Settings (GPC) on EC Models 10/100 10/100 100/1000 100/1000 100/1000 1000/10,000
Head Loss in PSI @
Continuous Flow GPM
2 @
125 GPM
2 @
205 GPM
2 @
330 GPM
2 @
505 GPM
2 @
935 GPM
2 @
1430 GPM

METER LENGTH 7 7/8" 7 7/8" 8 7/8" 9 7/8" 11 7/8" 13 7/8"
METER WIDTH 6 1/2" 7 1/4" 7 7/8" 8 5/8" 11 1/4" 13 3/8"
METER HEIGHT 7 7/8" 10 1/2" 9 5/8" 10 3/16" 15 1/4" 16 1/8"
METER CENTER LINE TO BASE 32" 3 3/4" 3 3/4" 4 1/2" 5 3/4" 6 1/2"
METER WEIGHT IN LBS. 23 29 29 36 86 110
FLANGE O.D 6" 7" 7 1/2" 9" 11" 13 1/2"
FLANGE THICKNESS 12" 1 1/82" 1 3/162" 1 5/162" 1 9/162" 1 3/42"
NO. OF & BOLT SIZE 4 - 5/82" 4 - 5/82" 4 - 5/82" 8 - 5/8" 8 - 3/4" 8 - 3/4"
BOLT HOLE DIAMETER 3/4" 3/4" 3/4" 3/4" 7/8" 7/8"
DIAMETER OF BOLTS 5/8" 5/8" 5/8" 5/8" 3/4" 3/4"
BOLT CIRCLE DIAMETER 4 3/4" 5 1/2" 6" 7 1/2" 9 1/2" 11 3/4"
METER CENTER LINE TO BASE 2" 2 1/2" 3" 4" 6" 8"

Downloads

Product Specifications
How to Read a Meter