Carlon Hot Water Turbine Meter

Hot Water Turbine Water MeterHave a hot water, high volume application that requires a high degree of accuracy with low maintenance features?

Then Carlon has a family of meters for you. Our hot water turbine meters are available in sizes from 3/4" to 6", with larger sizes available upon request.

Carlon offers temperature ratings for its hot water turbine meters at 248ºF. These turbine meters provide +/- 2% accuracy at flow rates from 1 GPM all the way up to 2,500 GPM.

Our turbine meters are all available in totalizing and electric contact configurations so that you can run your other process equipment (Carlon valves, timers, controllers and chemical pumps) directly from our turbine meter.

Hot Water Turbine Water MeterOffering These Advantages

  • Hot Water Meters for temperatures up to 248ºF in sizes from 3/4 "to 6"
  • All available in both Totalizing and Electric Contacting Models for the control of water treatment equipment, such as chemical feed pumps, timers, valves, etc.
  • Optional Car-Logger units available
  • Consult factory for larger size meters 8" to 20".
  • On 2" larger sizes, register can rotate 340 degrees for ease of reading meter after installation

Water Meter Connections

  • Threaded (3/4" to 1 1/2") or ANSI flange (2" - 6") connections furnished with each turbine meter ordered.

Product Details

Main Case: Epoxy Coated Cast Iron
Operating Pressure Range: 15 to 232 p.s.i.
Temperature Range(s) 3/4" thru 1-1/2" sizes: 25-248ºF
2" and larger sizes: 25-248ºF Hot Water Series
Accuracy: 2% of Flow Rate
Registration: U.S. Gallons
Electric Contacting Models: Maximum Switching Voltage 48 volts AC/DC Maximum Current .2 amps, 3 watts

Specifications for Hot Water Turbines

Model
H075
H100
H150
H200
H300
H400
H600
Size
3/4"
1"
1 1/2"
2"
3"
4"
6"
Flow Rate
in GPM
1-20
2-50
3-85
2-132
5-352
8-528
20-1320
Gallon/Contact Settings
on EC Models
1/10/100
1/10/100
10/100
10/100
100/1000
100/1000
100/1000
Head Loss at PSI
Continuous Flow GPM
2
10
2
25
2
42
2
153
2
330
1
395
1
750
Dimensions – Inches:
Flanges
-
-
-
6 1/2"
8"
8 3/4"
11 1/4"
Bolt Holes
-
-
-
4
4
8
8
Bolt Hole-Dia.
-
-
-
5/8"
5/8"
5/8"
3/4"
Bolt Circle-Dia.
-
-
-
4 3/4"
6"
7 1/2"
9 1/2"
Bore Diameter-
Continuous
-
-
-
2"
3"
4"
6"
Length
7 1/2"
10 1/4"
11 7/8"
7 7/8"
8 7/8"
9 7/8"
11 7/8"
Overall Width
3 3/4"
4"
5 1/2"
6 1/2"
7 7/8"
8 5/8"
11 1/4"
Height
6"
7 1/4"
8 1/8"
12 1/4"
13"
13 1/2"
14 1/4"
Center Line
to Base
-
-
1"
3"
3 3/4"
4 1/2"
5 3/4"
Weight in Lbs.
4.5
7
11.5
32
39
46
72

Downloads

Product Specifications
How to Read a Meter