|
|
Chem-Gard® Pumps
Chem-Gard® heavy-duty and rugged horizontal centrifugal pumps are designed, engineered and constructed to handle corrosive, abrasive and other aggressive fluids, as well as those liquids which must remain free of metallic contamination.
|
|
|
Chem-Gard® CG
The Vanton Chem-Gard® CG design was the first horizontal centrifugal pump engineered from inception to utilize the unique characteristics of thermoplastics.
|
|
|
Chem-Gard® CGA
These end suction pumps combine centerline discharge and back pullout construction with the Chem-Gard® wide open seal, sliding bar pedestal design.
|
|
|
Chem-Gard® CGC
Vanton magnetically driven ANSI pumps are ideal for handling corrosive, and hazardous fluids.
|
|
|
Chem-Gard® CGM
The Chem-Gard® CGC close-coupled, thermoplastic pump sees wide use in clean room applications.
|
|
|
Chem-Gard® PG
This heavy-duty, self-priming, centrifugal pump handles flows to 175 gpm (40 m3/hr), making it ideal for acid buggies, sump and tank evacuation, and emergency overload pumping.
|
|
|
Flex-I-Liner® Pumps
Flex-I-Liner® peristaltic type rotary pumps are engineered for dependable, leak proof handling acids, caustics, salts, abrasives slurries, solvents, chlorides, and other clear or viscous fluids, even those containing soft solids.
|
|
|
Sump-Gard Pumps
Every wetted component in a Vanton SUMP-GARD® vertical pump, including the heavy-wall shaft sleeve, is offered in PVC, CPVC, PP, PVDF, and other non-metallic materials compatible with the pumped fluid.
|
|
|
Sump-Gard SG
Vanton SG models are available in polypropylene, PVC, CPVC and PVDF. They can be furnished in sizes from 1x1 to 6x4, in lengths to 20 ft, for flows to 1450 gpm, at heads to 245 feet and for use at temperatures to 275 F.
|
|
|
Sump-Gard SGK
Vanton SGK cantilevered sump pumps feature a large diameter, plastic sleeved, alloy steel shaft that eliminates the need for immersed bearings or bushings, allowing run-dry operation for extended periods.
|
 |
Multi-Duti Sequence 750
The compact model 750 series delivers big flow for little power. Great for smaller and simple ponds (3,000 gallons or less).
|
 |
Multi-Duti Sequence 1000
For the application that demands high performance, we offer the Sequence® Power Series with abundant flow and pressure.
|
|
Multi-Duti Sequence Power 1000
The model 1000 series has set the stand by which all others are measured. This series is a perfect blend of medium pressure and ample flow for the majority of ponds
|
 |
Multi-Duti Sequence Power Primer
The Sequence® Power series is made for those demanding applications where the constraint for high pressure is not subject to negotiation!
|
 |
Multi-Duti Sequence Primer Alpha
The Primer series integrates a basket-type pre-filter and self-priming capabilities into one efficient package for trouble-free operation.
|
 |
Multi-Duti Sequence Primer Champion
The motor is totally enclosed, fan-cooled for durability 115V or 230V with an 8-foot, cordset. 3 year limited warranty .
|
 |
Multi-Duti Sequence Sun Pump
Introducing the all-new "off-grid" Sun Pump by Sequence®. This pump may look small, but it delivers big flow that is powered exclusively by the sun.
|
 |
S Series Pumps
Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases.
|
 |
I Series Pumps
Pacer Pumps' I Series Self-Priming Centrifugal pumps are lightweight and provide corrosion resistance and efficient performance for a wide variety of water and corrosive liquid applications - for chemicals, wastes, acids and other industrial liquids.
|
 |
G Series Pumps
Pacer Pumps' 'G' Series Self-Priming Centrifugal pumps - the self-priming ability, chemical resistance, light weight and basket strainer make this an ideal chemical transfer, waste treatment, emergency/backup or filter pump.
|
 |
T Series Pumps
Pacer Pumps' T Series pumps are self-priming, solids handling centrifugal pumps that will pass a solid half the diameter of the suction port.
|
 |
PC Series Pumps
The PC Series pump from Pacer Pumps - for pumping, transferring or recirculating of acids, plating solutions, photographic chemicals, fume scrubber, waste water, etching and cleaning solutions.
|
 |
Magnetic Coupled Pumps
Pacer's Magnetic Coupled, Seal-Less Centrifugal pumps are molded from non-metallic corrosion resistant material.
|
 |
Vertical Pumps
The O Series makes up Pacer's line of electric driven, close-coupled vertical pumps, for various industrial and OEM applications.
|
 |
Drum Pumps
Pacer's DP Series Drum pumps are engineered to safely transfer aggressive chemicals from drums, tanks and large storage vessels. Pump tubes (liquid ends) are available in a variety of materials and immersion lengths.
|
 |
Hand Operated Pumps
Pacer's HP Series Hand Dispensing pump is a double-acting piston type which will handle a wide range of solutions.
|
|
