DataSwitch Remote Relay Controller from Flowline

DataSwitch, Remote Relay Controller, Flowline
The general purpose controller provides single tank level indication with 2 relays, 1-3 set points and an isolated 4-20 mA repeater. Relay 1 is configurable on a single set point. Relay 2 can be configured on a single set point or latched on two set points for automatic fill or empty control. A LED bar graph indicates the level as a percentage of measured span.
3.5 digit LED display indicates level in custom engineering units
EasyCal push button calibration for span, display and relay set points
Fail-safe design with security lock out calibration for process safety
PP 35 mm DIN enclosure with removable terminal strips
DataSwitch, Remote Relay Controller, Flowline DataSwitch, Remote Relay Controller, Flowline
Display type:
LED, 3.5-digit
Display units:
Display output:
Input channel:
(1) 4-20 mA
Supply voltage:
120/240 VAC, 50-60 Hz.
Sensor supply:
28 VDC @ 5 watts
Repeater output:
4-20 mA, 12-36 VDC
Contact type:
(2) SPDT relays (1 latching)
Contact rating:
250 VAC @ 10A
Contact output:
Selectable NO/NC
Operating temp:
F: -40° to 158°
C: -40° to 70°
Enclosure material:
Enclosure type:
35 mm type
General purpose
DataSwitch, Remote Relay Controller, Flowline

Data sheet download.