TIDALFLUX 2300 F Flow Sensor From KROHNE

TIDALFLUX 2300 F, Flow Sensor, KROHNESolution for partially filled pipes

  • Measurement in partially filled pipes up to DN1600 / 64"

  • Patented, non-contact level measurement

  • Measurement possible down to 10% filling of pipe

  • Sensor and converter available in Ex zone 1

The TIDALFLUX 2000 flow sensor with integrated and non-contact capacitive level measuring system provides accurate flow measurement in partially filled pipes.

TIDALFLUX is designed to measure reliably between 10% and 100% of the pipe cross section. The integrated level sensors in the liner are in no contact with the liquid and are therefore insensitive against fat and oil floating on the surface.


  • For partially filled pipes in the water and wastewater industry

  • Broad diameter range up to DN1600 / 64"

  • High abrasion resistance and chemical resistance

  • Measurement possible between 10% and 100% filling

  • Electrodes for flow measurement are below 10% filling level, therefore no

  • blind folding by fat and oil floating on the water surface

  • Complete factory calibration - no on-site calibration necessary


  • Water

  • Wastewater


  • For partially filled pipes instead of expensive siphon tube constructions

  • Water and wastewater

  • Surface water

  • Biological and chemical wastewater