Masterflex P/S Peristaltic Process Digital Pump Systems

Masterflex, P/S, Peristaltic, Process, Digital, Pump Systems, Thermo ScientificMasterflex P/S Peristaltic Process Digital Pump Systems are ideal for metering, dosing, transfer, and dispense in corrosive process and washdown environments.
We are a global industry leader in the design, engineering and manufacturing of peristaltic tubing and hose pumps.

Transfer, chemical feed, meter, in wet and washdown environments with these IP66 and NEMA 4X rated . Powder coated housing and sealed keypad are protected from dust, water, and chemicals in the wash down environment—simply hose down to clean.

  • IP66 and NEMA 4X rated. Sealed 316 stainless steel housing and sealed keypad are protected from dust, water, and chemicals in the wash down environment-simply hose down to clean

  • Flow rate: 0.006 to 3400mL/min. (0.0001 to 54 gph) with P/S tubin

  • Flow rate depends on drive rpm and tubing size

  • Graphical LCD display shows six different parameters: motor rpm, flow rate, dispense volume, cumulative volume, dispense interval time, and copy number

  • Dispense by: volume-in milliliters (0.001 to 99,999), liters, and gallons; copy-1 to 99,999 dispense cycles

  • Set time interval (SEC) between dispense cycles from 1 to 99,999 seconds

  • Remote control capabilities via fluid-resistant input/output connector on back of drive:
    - Speed control input: scalable 0 to 20 mA, 4 to 20mA, 0 to 10V
    - Pumping direction: requires open collector or contact closure
    - Start/stop/purge: requires open collector or contact closure
    - Tachometer output: scalable 0 to 20mA, 4 to 20mA, 0 to 10 V, or open collector

Certifications: CE marked, ETL, cETL

Specifications:

EXTERNAL CONTROL INPUT :
0 to 20 mA, 0 to 10V; Scaleable

START/STOP, DIR. (CW/CC), PRIME via contact closure

Remote / Local Enable Contact

Secondary Speed Control 0-20mA or 4-20mA

Auxiliary Contact (Limit Switch)
EXTERNAL CONTROL - OUTPUT :

 Motor running logic :


 Tachometer output :

 Power supply :
4 to 20 mA, or 0 to 10 V

N.O. or N.C. (1A @ 24V)

5V, TTL pulse

24V, 150 mA
VOLTAGE
 (50/60 Hz) :
115/230 VAC
(auto selected)
MOTOR TYPE :
Brushless continuous duty, TENV*, DC, permanent lubricated bearings
CONTROL TYPE :
PWM (Pulse Width Modulated)
SPEED REGULATION
 (repeatability) :
0.1%; 0.1 rpm @ 600 rpm; %; 0.21 rpm @ 100 rpm
OPERATING TEMPERATURE :
0 to 40C (32 to 104F)
STORAGE TEMPERATURE :
25 to 65C (13 to 149F)
HOUSING MATERIALS :
ABS, Powder-coated aluminum
IP RATING :
IP66 and NEMA 4X
AGENCY APPROVALS :
ETL, cETL, CE
CONTROLLER DIMENSIONS :
13.0 x 8 x 8
(L x W x H)
SHIPPING WEIGHT :
30 lbs.

Masterflex® P/S Process Digital Pump Systems

Operating Manual: P/S Pump Drives