Municipal Pumps from Peerless Pump

Municipal Pumps, Peerless PumpMunicipal Pumps

The importance of clean water and the proper disposal of waste water demands the utmost in pumping reliability and performance. That's why Peerless pumps are an integral part of municipal pumping stations and treatment plants throughout the country and around the world.

Peerless municipal pumps are designed to the most stringent specifications and built to withstand the rigors of around the clock municipal operations. Long life and low maintenance are the rule, providing municipalities with consistent and cost effective pump operation.

Municipal Pumps, Peerless Pump

Peerless Pump Type A Pump

The Peerless Pump Type A Pump is a cast iron, bronze-fitted, single stage, double suction, horiaontal split case. Engineered and manufactured in the USA using the latest technology for the industrial, process, municipal and HVAC markets. There are 20 pump sizes ranging from ten-inch to twenty four-inch discharge.

Type A pumps can be applied to a variety of pumping jobs handling water and other liquids, even when there is a modest amount of non-abrasive solids in suspension. Typical installations include: Industrial Service, Pharmaceutical Manufacturing, Municipal Water Supply and many other large flow requirements.

Horizontal Split Case - Series A |

Municipal Pumps, Peerless Pump

Peerless Pump Engineered AE Series Pump

Using the latest technology, Peerless Pump engineered the AE series pump to accommodate a variety of applications. The single stage, double suction, horizontal split case pump comes in forty-two different hydraulic configurations and twenty-five pump sizes. Discharge sizes range from two to ten inches. The AE has a wide selection of hydraulic performance envelopes, multiple mechanical configurations and several material options.

The AE Series pump handles water and other nonabrasive fluids. Applications vary from small, single pump commercial installations to large, mulit-pump municipal water supply systems. The Peerless Pump municipal water supply systems. The Peerless Pump AE Series gives superior performance in agriculture general industry, building trade, power industry, fire protection, municipal and process applications.

Horizontal Split Case - Series AE |

Municipal Pumps, Peerless Pump

Peerless Horizontal Split Case BT F-2000

The Peerless BT pump is a cast iron, bronze-fitted single stage double suction horizontal split case pump. Engineered and manufactured in the USA using the latest technology, the BT has been specifically designed to meet the needs of both installing contrators and owners in the HVAC and plumbing systems for commercial buildings. The BT pump is a cost-effective, reliable, durable, and efficient pump the best value in the marketplace.

Peerless Horizontal Split Case BT F-2000 Brochure |

Municipal Pumps, Peerless Pump

Peerless Pump C Series Pumps

The Peerless Pump C Series Pumps are close coupled with standard C-face JM or JP solid shaft ball bearing motors specifi cally designed for pump applications in accordance with standards developed by the Hydraulic Institute (HI) and the National Electrical Manufacturers Association (NEMA).

Peerless Pump Series C close coupled single suction pumps are designed for applications in medium duty service and provide maximum pump value in heating, air conditioning booster and general circulating service.

End Suction - Series C Pump |

Municipal Pumps, Peerless Pump

Peerless Pump F Series Pumps

The Peerless Pump F Series Pumps are general purpose, frame mounted, end suction pumps flexibly coupled to drivers and equipped with coupling guards. Each entire unit can be mounted on a steel base. An optional drip pan is available.

Peerless F Series pumps are designed for applications in medium duty service, providing maximum pump value in heating and air conditioning, booster and general circulating service.

End Suction - Series F Pump |

Municipal Pumps, Peerless Pump

General Purpose End Suction Pumps Type PE
- Fractional HP

The Peerless Series PE - Fractional Horsepower are non-modifi able units equipped with preset impeller trims for non-overloading performance including the motor’s allowable service factor, when the liquid has 1.0 specific gravity, 31 SSU at 80 0F. C-Face Mounted Jet Pump Motors with stainless steel shafts are used with this fractional PE series.

Fractional horsepower PE pumps are suitable for clear non-corrosive liquids such as water or ethylene glycol solutions and must not be used with hydrocarbons. These units provide maximum pump value for heating, air conditioning, booster and general circulating service.

Series PE End Suction Fractional Horsepower |

Municipal Pumps, Peerless Pump

General Purpose End Suction Pumps Type PE
- Integral HP

Peerless Pump Series PE - Integral Horsepower are the same as Peerless Pump Type C pumps, except the PE pumps are non-modifi able units equipped with preset impeller trims for non-overloading performance. They use the same C-face JM motors specifically designed for pump applications in accordance with standards developed by the Hydraulic Institute and the National Electrical Manufacturers Association.

Peerless Pump Series PE pumps are suitable for clear non-corrosive liquids such as water or ethylene glycol solutions, providing maximum pump value for heating, air conditioning, booster and general circulating service.

Series PE End Suction Integral Horsepower |

Municipal Pumps, Peerless Pump

Peerless Pump 8175 Series Process Pump

The Peerless Pump 8175 Series process pump is manufactured for a wide range of flow and head requirements. The 8175 Series pumps is engineered to lower your operating costs over time. Designed for endurance, it is possible to replace only the back-pullout assembly without having to remove the coupling and motor. Casings are extra thick, and shafts and bearings are heavy-duty, making the 8175 the ideal pump for the toughest of services. The 8175 Series pump is interchangeable with competitors’ pumps, making it possible to retrofi t existing installations with quality Peerless Pump products. All 8175 Series power ends are backed with Peerless Pump’s three-year warranty.

Series 8175 - Paper Stock/Slurry Pump |

Municipal Pumps, Peerless Pump

Peerless TU or TUT Multi-Stage Horizontal Split Case Pumps

The Peerless TU or TUT pump is a cast iron, bronze-fitted, multi stage, horizontal split case design. Type TU pumps are 2 stage design, while TUT pumps are 3, 4, and 5 stage. Engineered and manufactured, there are 35 pump sizes ranging from one and one half-inch to ten-inch discharge.

The TU and TUT Series pump handles water and other non abrasive fluids. Applications vary from small, single pump commercial installations to large, multipump municipal water supply systems. The Peerless Pump TU and TUT Series give superior performance in Agriculture, General Industry, Building Trade, and Municipal applications.

TU/TUT Multi-Stage Horizontal Split Case Pumps |

Municipal Pumps, Peerless Pump

The Peerless Pump Fire Pump Units, Systems, and Housed Packaged Systems

Thousands of Peerless Pump installations (UL, ULC or FM approved) deliver superior fire protection to facilities worldwide. For over eighty years Peerless Pump has been offering complete service, from engineering assistance to in-house fabrication to field start-up. Products are designed from a broad selection of pumps, drives, controls, baseplates and accessories. Pump choices include horizontal, in-line and end suction centrifugal fire pumps as well as vertical turbines.

Peerless Fire Product Line Brochure |

Municipal Pumps, Peerless Pump

Constant Pressure Pump Controller System

The Peerless HC Plus system uses state-of-the-art technology, with easy to operate controls. From start-up sequencing to shut-down logic, the Peerless system is designed to provide the pump user with complete system control, as well as maximum operating efficiency.

The HC Plus unit is controlled by the most technologically advanced Programmable Logic Controller (PLC) for easy operation and simple confi guration of the input and output parameters demanded by an installation. The PLC includes an Operator Interface Device (OlD), which provides easy access to application specific information.

HC Plus |

Municipal Pumps, Peerless Pump

Peerless Pump® Submersible Vertical Turbine Pump

Peerless Pump® Submersible Vertical Pump will handle a wide range of hydraulic and mechanical coverage, combined to equal or surpass the highest efficiency peak performance and lowest pumping costs in the industry. Consisting of four basic elements; (1) pump bowl assembly, (2) column pipe, (3) discharge elbow at grade level and (4) submersible electric motor. Peerless Pump® offers a wide range of sizes of submersible pumps.

Submersible vertical pumps are commonly used where: low noise levels are required; above ground equipment needs to be hidden from view; flood levels could damage typical above ground electric motors; environmental requirements limit all acceptable methods of line shaft lubrication; installation time and cost is limited. Varieties of material combinations are available to accommodate nearly any intended service. Peerless’ wealth of application experience assures you of excellent engineering consultation during the design phase.

Submersible Turbine Pumps |

Municipal Pumps, Peerless Pump

Peerless Pumpmulti Pumps Horizontal Multi-Stage Centrifugal Pumps

Peerless Pumpmulti pumps are horizontal multi-stage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN 25199. The advanced modular design reduces the number of parts while maximizing intergangeability. Optimal selection of impeller diameter and diffuser size for each ensures that the pump closely match the required duty conditions.

Pumps of the Peerless Pumpmulti pumps range meet the specific requirements of many applications, such as: waterworks, water supply, boiler feed, pressure boosting, irrigation, high pressure cleaning, heating, condensate systems, reverse osmosis, chemical, process, and many more...

Peerless Multi Stage Web Brochure |

Municipal Pumps, Peerless Pump

Interchangeable Parts ANSI/Process Pumps

Peerless Pump has been engineering and manufacturing pumps since 1923. Along the way, we’ve delivered thousands of pumps and pioneered new technologies. Our commitment to quality is reflected in our ongoing research and development efforts. Our process pump line, through product enhancements and design changes is now firmly established as a top ANSI pump and parts supplier.This same commitment is reflected by our people, dedicated to the sale and distribution of genuine Peerless replacement parts. Our philosophy is to deliver OEM quality without charging the high prices typical of other OEM suppliers.

Genuine Replacement Parts |

More Peerless Municipal Pump Brochures  
Vertical Turbine Brochure/Poster Poster - 16 x 20
Brochure - Matrix Format System Analysis for Pumping Equipment Selection
Peerless ELS Threaded Vertical Turbine OLS Threaded Vertical Turbine
Handbook of Pump Engineering Data Peerless Full Product Line Brochure
Why Peerless Brochure Peerless Cut Cost Begin with the End Brochure
Peerless Corporate Capabilities Brochure HVAC and Hydronics Equipment
The Biggest and Best In The World Brochure Vertical Turbine Pump Data