Pre-Engineered Feed Systems From Pulsafeeder

Pulsafeeder, Pre-Engineered Feed Systems, Chem-Tech XP Series pump systems

Pulsafeeder, Pre-Engineered Feed Systems, Chem-Tech XP Series pump systemsChem-Tech XP Series pump systems makes selecting the right water meter and pump combination easy. Just match the PPM dosage of 5.25% concentration or 1.0% concentration range combinations to the five pump outputs and each water meter. All you need to know is the peak flow rate that most closely matches that of your system. The peak flow rate is the highest possible flow rate the system can handle. Then the PPM range that most closely matches your target dosage. The target dosage should fall near the middle to the low side of the range.

Just match the PPM dosage of 5.25% concentration or 1.0% concentration range combinations to the five pump outputs and each water meter. All you need to know is the peak flow rate that most closely matches that of your system. The peak flow rate is the highest possible flow rate the system can handle. Then the PPM range that most closely matches your target dosage. The target dosage should fall near the middle to the low side of the range.

Features:

  • Pump and water meter combination in one package

  • Easy to install

  • Turn-Key system

Specifications:

Product Body
Water Meter: Cast Bronze
Drive Magnet
Alnico
Power Input
115 VAC, 230 VAC
Timers
Fixed with Pulse Timer: 0.1 to 10 sec / 0.2 to 10 sec / 1 to 60 sec
Pulse Output Sensor
Reed Switch
Product Options
  • Timer Mode
  • Voltage
  • Water Meter
  • Tanks
  • In-line Static Mixer
  • Strainers
  • Panel Mount or Tank Mount



Pulsafeeder Tank Systems